KC1000 is a solvent-free insulating anticorrosive waterproof coating, bubble is in water for a long time still can maintain the performance, can reduce the corrosion of corrosive environment of electric equipment, can reduce the snakes, rats, birds, small animals such as the cause of disaster risk, also can reduce because of the extreme weather (the typhoon, rain and snow, etc.) caused by accidents, provide long-term stable safe protection for power supply.
Product Features
Applications
Technical Parameters
|
No. |
Test Item |
Typical Value |
Test Standards |
|
1 |
Flame resistance |
V-0 |
UL94 |
|
2 |
Post-cure hardness |
75 |
ASTM D 2240 |
|
3 |
Breakdown voltage |
1, 0.3mm thick coating: 10.4kV 2, 0.8mm thick coating: 24.4kV |
ASTM D 149 |
|
4 |
Wear resistance |
Weight lossat 1000 revolutions: < 0.040mg |
ASTM D 4060 |
|
5 |
Elongation at break |
30% (after curing) |
ASTM D 412 |
|
6 |
Resistance to salt fog |
5000 h without defect |
ASTM B 117 |
|
7 |
Cold and hot shock test |
after 100 cycles of cold and hot shock at- 40℃ and 85℃, t no defect |
ASTM D 1211 |
Direction for Use
1. Clean surface and keep dry;
2. Mix A and B according to 4:1 and stir well;
3. The protected surface can be evenly brushed, in general, brushing once can achieve the effect;
4. If the requirements are strict, can be in the first time after the table dry, besmear second times;
5. The complete curing time of the product is 60min~70min.
Package
1L / set (including A material 780ml, B material 220 ml)
100ml / set (including A material 78ml, B material 22 ml)
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
