Product Instruction
KC9000 heat-absorbing and fireproof blanket is a fireproof product that can be directly coated on the external protection of equipment, power cable, cable bridge, etc., which can effectively prevent flame spread and reduce the serious damage caused by high temperature conduction. In case of fire, the product can resist the high temperature flame above 1000℃, and release chemical crystal water to absorb a lot of heat, effectively reduce the surface temperature of the protected facilities, and provide adequate emergency response time for the protection of the facilities.
Product Features
Applications
Technical Parameters
No.
Test Item
Typical Value
Test standards
1
Tensile Strength，kPa
≥600（Coated metal foil）
GB/T 17911-2018
2
Combustion performance
A
GB 8624-2012
3
Coefficient of thermal conductivity，W/m·k,500℃
0.069
YB/T 4130
4
Bulk density
400、600、800
/
5
Fire performance
2h None of the fuses or circuit breakers are disconnected and none of the bulbs remain on
In accordance with the IEC 60331-1:2018 Integrity tests for cables under flame condition - Part 1: Test method for fire supply and impact of cables with a rated voltage up to 0.6/1kV and an outer diameter exceeding 20mm by flame temperature not less than 830℃
Direction for Use
1. Measure the size according to the on-site installation environment;
Product Specification
|
型号 |
Specifications |
Package |
||
|
Width（mm） |
Thickness（mm） |
Length（m） |
||
|
Model |
610 |
10 |
6 |
1 roll/box |
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
