This purifier use hydrogen which is provided by water electrolysis, cylinder or PSA hydrogen equipment as original resource. Through gas I liquid separator, catalyzing deoxidization, drying and filtering aspirating,this hydrogen purifying equipment can generatehighpurityhydrogen.This equipment applies multiple circular procedure so called parallel connection with two absorption drying tanks. Since one tank starts toabsorb, the other tankwillpreparefor workwhile drying molecular sieve inthe other tank for continued working. The four- -way valve can be set as manual or automatic and remote control also can be set according to theclient's requirement.

CHR series applies complementary powersupply from wind energy, solar energy andelectricityatnighttoproducehydrogen.Then,using metal hydrogen storage technology orcompressedhydrogenstoragetechnologytostore this hydrogen. If lack of electricity, usercan use hydrogen fuel cell to converthydrogen to electricity by configuring DCIACconverter. If hydrogen fuel filling stationneeded,user can configure hydrogenboostingsystemtofillhydrogenintohydrogenfuel cell car, drone, bus, truck, electricvehicleandforklift.

The equipment use water electrolysis to generate pure hydrogen and pure oxygen. By controlling the liquid level of hydrogen oxygen tank, to ensure the hydrogen purity.It will go through the processes such ashydrogen washing, gas / liquid separation and cooling process to finally produce hydrogen.

The equipment uses water electrolysis to generate pure hydrogen and pure oxygen. By controlling the liquid level of hydrogen Ioxygen tank, to ensure the hydrogen purity.It will go through the processes such ashydrogen washing, gas 1 liquid separation,cooling, purifying deoxidization and dry process to produce high purity hydrogen.Then, this high purity hydrogen will be installed into the internal storage tank andthe system starts to boost pressure which can up to 70Mpa.

The liquid nitrogen generator (liquid nitrogen machine) is composed of three parts: nitrogen generator (built-in or external), refrigeration equipment (gas liquefaction equipment) and Dewar tank. The whole machine has the function of automatic liquid replenishment with one key, and the equipment starts automatically when the liquid nitrogen in the liquid nitrogen tank is lower than the set liquid level. Liquid nitrogen machine manufacturing adopts the principle of mixed mass throttling refrigeration, cooling nitrogen from the ambient temperature to the saturation condensing temperature of nitrogen liquefaction step by step, the lowest temperature of refrigeration machine refrigeration can be up to -196 °, the liquid nitrogen liquefied in the refrigeration evaporator is transported to the liquid nitrogen tank to save the liquid nitrogen to obtain liquid nitrogen, the equipment automatically detects the liquid nitrogen level in the Dewar tank, and fully automatic control of the operation of the equipment.

The nitrogen liquefier adopts the principle of mixed mass throttling refrigeration to cool the nitrogen from ambient temperature to the saturation condensing temperature of nitrogen liquefaction step by step, and the lowest temperature of the refrigerator can reach 196°. The liquid nitrogen liquefied in the evaporator is transported to the liquid nitrogen tank to save the liquid nitrogen, and the equipment automatically detects the liquid nitrogen level in the Dewar tank and controls the operation of the equipment fully automatically.

The equipment uses water electrolysis to generate pure hydrogen and pure oxygen. By controlling the liquid level of hydrogen 1 oxygen tank, to ensure the hydrogen purity. It will go through the processes such as hydrogen washing, gas I liquid separation,cooling, purifying deoxidization and dryprocess to produce high purity hydrogen.

The air enters the air compressor after removing dust and mechanical impurities through the air filter, compressing to the required pressure, and outputting clean compressed air after strict purification treatment of oil, water and dust removal, with the purpose of ensuring the service life of the molecular sieve in the adsorption tower. There are two adsorption towers with carbon molecular sieves, one tower works while the other tower is decompressed and desorbed. The clean air enters the working adsorption tower, passing through the molecular sieve when oxygen, carbon dioxide and water are adsorbed by it, the gas flowing to the exit end is nitrogen and trace amounts of argon and oxygen. Another tower (desorption tower) so that the adsorbed oxygen, carbon dioxide and water from the molecular sieve pores out of the discharge to the atmosphere. In this way, the two towers take turns to complete the separation of nitrogen and oxygen, continuous output of nitrogen, variable pressure (_bian4 ya1) adsorption nitrogen purity of 95%-99.9%, if you need a higher purity of nitrogen need to increase the nitrogen purification equipment. Variable pressure adsorption nitrogen machine output of 95%-99.9% nitrogen into the nitrogen purification equipment, while adding the appropriate amount of hydrogen through a flow meter, in the purification equipment in the oxygen removal tower hydrogen and nitrogen in the trace oxygen catalytic reaction to remove oxygen and then cooled by the water condenser, vapor separator to remove water, and then through the dryer depth drying removal.

Alkaline hydrolysis tank / laboratory hydrogen generator

Modular electrolyzer, Zhongxinda is committed to the full ecological coverage of hydrogen energy.

Green Hydrogen Electrolysis, the production of hydrogen on site is carried out whatever the Customers’ use for it, while ensuring the perfect control of processes and costs.

PEM electrolyzer stacks; ZXDH2 is committed to providing long-term and sustainable value to customers.

The unique composite ceramics filter, which can effectively generate antioxidant, scavenging free radicals, small molecules, alkaline, retention of minerals and oxygen rich water with health.

Electrolysis cells are characterized by their electrolyte type. Cummins works with two types of low-temperature electrolysis: alkaline and proton exchange membrane (PEM). We offer both options to support a wide range of solutions based on the cost, capacity, and application.

Green Hydrogen Electrolyser made by ZXD; the production of industrial hydrogen on-site, on demand, according to your specifications.

Hydrogen Electrolyzer made by ZXD, we have accumulated mature technologies in various application scenarios.

Water Electrolyzer made by ZXD; the production of industrial hydrogen on-site, on demand, according to your specifications.

Industrial Design Electrode Water Electrolysis Equipment Hydrogen Generator with Capacity 100m3/h made by ZXD, the production of hydrogen on site is carried out whatever the Customers’ use for it, while ensuring the perfect control of processes and costs.

Water tank and alkali tank for hydrogen production by water electrolysis

Solar Hydrogen Power Plant, the equipment is controlled by a new type of programmable logic controller (PLC), providing users with an efficient, reliable and safe hydrogen production system.