Oropharyngeal Throat Swab

Sales Oropharyngeal Throat Swab

Anhui wensheng medicals as professional Flocked Swab Manufacturers provide Nasopharyngeal And Oropharyngeal Swabs for covid Antigen Swab Test and PCR swab test.The preferredThroat Swab as flocked swab for swab-based covid testing.

High sample collection efficiency due to the unique spray type nylon pile implantation technology.

ABS swabstick with different breakingpoint, easy to operate and no interfere with PCR testing.


  • Composition : Oropharyngeal / Throat Swab (Individually Packaged)
  • Package : 500 pcs/box (18 boxes/ctn; And total is 9000pcs/carton)

Product Detail  

Product Name

Anhui wensheng medicals as professional Flocked nylon Swab Manufacturers provide Nasopharyngeal And Oropharyngeal Swabs for covid specimen sampling usage.The preferred Throat Swab as flocked swab for virus oral and throat sampling specimen(Naso Oropharyngeal Swab/Oral Swab Stick/Naso Oropharyngeal Swab
 /Throat Swab Testing/Nasopharyngeal And Oropharyngeal Swabs/Oropharyngeal Swab Collection/Throat Swab)



Intended use

Used for specimen collection (i.e. COVID-19, flu, swine flu, HFMD, enteric virus and other respiratory virus sampling).



Main Components

Disposable sampling swab (Individually wrapped)



Composition

Total Length

15cm

The material for the flocking PA66

The material for the stick

ABS

The length for the flocking

20±5mm

Cat No. WS1010 WS1011 WS1012
Specification

Nasopharyngeal / Nasal / NP Swab

Oropharyngeal / Oral / OP / Throat Swab

Oropharyngeal / Oral / OP / Throat Swab
Breakpoint Length
8cm
8cm
3cm

Flocking Diameter

3mm
4mm
5mm
Image




Storage and Expiry Date

Transportation and storage at room temperature, valid for two year.



Caution

• Instructions should be read and followed carefully.

• Wear suitable protective clothing, gloves, and eye/face protection while handling.

• Do not use the sample preservation medium for pre-moistening or pre-wetting the applicator swab prior to collecting the sample or for rinsing or irrigating the sampling sites.

• Disposable device, do not reuse.

• Do not touch the applicator in the area below the breakpoint indication line.

• Do not use if the swab is visibly damaged.

• Wash hands thoroughly after handling.



Protocol

Step 1:Peel the package.

Step 2:Collection of the sample:

• To collect a nasopharyngeal sample:

Tilt patienfs head back 70 degrees. Gently and slowly insert the swab through the nostril parallel to the palate (not upwards) until resistance is encountered or the distance is equivalent to that from the ear to the nostril of the patient, indicating contact with the nasopharynx. Gently rub and roll the swab and slowly withdraw while rotating it.

• To collect a oropharyngeal/throat sample:

Insert swab into the posterior pharynx and tonsillar areas. Rub swab over both tonsillar pillars and posterior oropharynx and avoid touching the tongue, teeth, and gums. Stop for several second to absorb secretions and then slowly remove swab while rotating it.

• To collect a anterior nasal sample:

Insert the entire collection tip of the swab provided (usually%to%of an inch, or 1 to 1.5 cm) inside the nostril. Firmly sample the nasal wall by rotating the swab in a circular path against the nasal wall at least 4 times. Take approximately 15 seconds to collect the specimen. Be sure to collect any nasal drainage that may be present on the swab. Repeat in the other nostril using the same swab and withdraw the swab.

• To collect a oral sample:

Hold the stick and gently insert the swab into the oral cavity, rotate about 5 times to ensure sufficient sample collection and withdraw.

Step 3:Quickly put the swab into the tube. Break the sampling swab at the breakingpoint, discard the handle end and tighten the pipe cover.



FAQ

Q1: What's your advantage? Why we choose you?

A: We are professinal source manufacturer in China. We have 3000m2 100,000-level standardized purification workshop with strong manufacturing ability and we have high value with competitive price.

Q2: What ls your payment term?

A: Payment term ls T/T in advance.

Q3: Do you have any certificates?

A: We have passed ISO 13485 Quality Management System certification, and we have ave obtained CE certifications and all the certificates required for export and local import custom clearance.

Q4: Where is your main market located?

A: 60% in Europe, 30% in Middle East and 10% in South Africa

Q5: What's your lead time?

A: For mass production, we deliver by batches and first batch can be delivered within 10-15 days after payment.

Q6: Do you support OEM/ODM?

A: YES, we can prototype and customize the ideal product according to your specific application.

Q7: How is the product package

A: Every unit is individually packed, and store in box and carton, we can also pack 12-18 cartons in one palletes for stable transportation.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.