Description:

Folding and slitting machine 6 meter/Hydraulic Metal Folding and Slitting Roll Forming Machine 6 Meter/CNC Folder Roll Forming Machine:  

Setting degree in control system then after monitoring system to make down folding process, finally manual semi-automatically work with the plain sheet to realize various steel section production. Such as trims, ridges, gutters, flashings etc…

Technical Details:

1) For Steel sheet: Aluminum coil

2) Thickness range: 0.3-1.0mm (aluminum up to 1.2mm)

3) Driven by Servo motor, pump motor: 0.82KW

4) Working length: 6000mm

5) Press clamp：7 units

6) Weight：Approx. 4000 Kg

7) Pressing power：Pump motor for hydraulic station 7.5KW（Located outside）

8) Bending range：0-125 degree

9) Depth of throat：1000 mm（Max. working width of material in clamp）

10) Hinge：7 groups

11) Total power：9.42KW (7.5KW+1.1KW+0.82KW)

10)Outline dimension（Length×Width×Height）：7600×1570×1770 (For reference only)

Slitting Device:

1) Type Of Blade : Slitting wheel

Diameter：∮80

Material：Cr12MoV (D2), heat treatment

2) Drive system：motor power 1.1KW

Guiding device：Steel chain circling

3) Slitting speed：Approx.4.8m/s

Slitting distance: Through steel chain circulation.

Bending & Slitting Device:

1) Max. Bending thickness     1.0mm

2) Max. Bending length         6000mm

3) Max. Slit thickness            1.0mm

4) Min. folding dimension       as below

Hydraulic power pack:

1) Capability：Max.16MPA

2) Capacity of oil tank： 460L

3) Power source：Hydraulic

PLC Control System (with running simulation system):

1) System：Austria B&R System

2) Numerical control locating system：Austria B&R PLC Control

3) Operating table：Austria B&R Touch Screen

4) Angle programmer：Encoder test

5) Slitting control：Manual

6) Emergency stop: e-stop button+ e-limit+ foot switch (right heavily)

 Roll forming products  folding sheet metal :

   CNC Folder Roll Forming Machine 6 Meter  :

   Loading Photos: