Wire Length 60mm 10.5-15V Dimmable DC Motion Sensor Compact Size

Sales Wire Length 60mm 10.5-15V Dimmable DC Motion Sensor Compact Size

Wire Length 60mm 10.5-15V Dimmable DC Motion Sensor Compact Size

Product Detail  

Wire Length 60mm 10.5-15V Dc Input Compact Size Dimmable DC Motion Sensor


Features of Sensor:

1. Output: 0-10V dimming sensor; Operating Current<30mA;

2. 360° detection angle when ceiling mounted;

3. Narrow / Wide detection area options;

5. -40~80℃ working temperature to support different environment;

5. Sensor size 66*20.5*12.1mm

6. With connector to make it easier to be connected with the LED driver. Save time.


Product Description of  Sensor:

Warranty 5 years
Stand-by power ≤0.5W
Operating current <30mA±5%
Control method DIM/1-10V / remote control
Microwave frequency 5.8GHz±75MHz
Operating voltage 10.5-15V DC (supply current>50mA)
Microwave power <0.3mW
IP grade IP 20
Operating temperature -40°C~+80°C


Mechanical structure of Motion Sensor:

Detection area Narrow/ Wide
Hold time 30s/1min/2min/5min
Daylight threshold 50Lux/Disable
Stand-by period 0s/1min/5min/∞
Stand-by dimming level 10%/30%



Dimensional drawing (Unit: mm) of Motion Sensor:

Compact size suitable for all kinds of lamps.


Wiring diagram of Motion Sensor:

Control method On/off / 1-10V dimming/remote control
Microwave frequency 5.8GHz±75MHz
Operating voltage 10.5-15V DC (supply current>50mA)
Wire color White:12V,Purple:Dim+,Gray:Dim-


Detection coverage of Motion Sensor:

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
Mounting height 4.8m/15.74ft (ceiling mounted)
Detection range W: +/-5' Radius;N: +/-2.5' (ceiling mounted)
Detection angle 360°(ceiling mounted); <150° (Wall Mounted)
Motion detection 0.5~1.5m/s


Installation of DC motion sensor:

3 pin connector,plug and plug,very easy to install and easy to use by end customer.

Installation precautions of motion sensor 1. Microwave sensor can be installed in any lamp except the one with full metal shell.
2. The detected surface cannot be shielded by metal objects.
3. Make sure the microwave module is completely exposed outside.
4. The detection surface of the sensor module shall be installed facing the detection area.
5. Should be kept away from the driver to avoid interference generation and lamp flashing.
6. Wiring must be strictly in accordance with the wiring diagram to avoid short circuit.


Suitable for ceiling light, troffer, triproof light, batten light, linear light, LED tube and etc.


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.