UL certificate 277v 12 volt 5A 100W 0-10V dimmable power supply led driver
This SMT-012-100VDH is UL approved 12Vdc 100W 0-10V ac 277v power supply led driver. Which are CE,UL, RoHS,FC C,Class p, type HL aluminum IP20 non-waterproof version suitable for indoor use.has advantages over osram 100w led power supply in the certificate
Features of 277v power supply led driver
Output constant voltage type
·Range 100-305VAC , Typical: 100-277VAC
·Built-in PFC function PF>0.90
·Efficiency > 88%
·Protections:short circuit/over current/over voltage/over temperature
·Cooling by free air convection
·IP20 design for indoor or outdoor installations .
·Dimming function:0-10V/ 1-10V/ 10VPWM signal or resistance .
·Suitable for LED lighting and moving sign applications
·Compliance to worldwide safety regulations for lighting
·Suitable for dry/damp locations
·7 years warranty
Specification of 277v power supply led driver
model
SMT-012-100VDH
SMT-024-096VDH
Output
DC Voltage
12V
24V
Voltage Accuracy
±0.5V
±0.5V
Rated current
8.3A
4.0A (class 2 type)
Rated power
100W
96W
Input
Voltage Range
100~277V AC
Frequency Range
47～63HZ
Power Factor ( Typ.）
PF≧0.98/110V , PF≧0.95/277V
Full Load Efficiency(Typ.)
>88%
>88%
>85%
>85%
AC Current（Typ.）
1.3A @110VAC
Leakage current
﹤0.5mA
Protection
Short Circuit
Hiccup mode, recovers automatically after fault condition
is removed.
Over voltage
≦140VAC(90~135V) , ≦270VAC(170~265V)
Environment
Working TEMP.
-40～+60℃
Working Humidity
20～90%RH,non-condensing
Storage TEM.,Humidity
-40～+80℃，10～95%RH
TEMP.coefficient
±0.03%/℃（0～50℃）
Vibration
10～500Hz，2G 10min./1 cycle，period for 60min.
each along X,Y,Z axes
Safety&EMC
Safety standards
UL8750+UL1310
Withstand voltage
I/P-O/P:3.75KVAC
Isolation resistance
I/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSION
FCC Part 15 B
Others
Weight
1.3Kg
Size
220*93*41mm (L*W*H)
packing
10PCS/CTN
385*335*200mm 20PCS/CTN
Notes
1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and 25℃of ambient temperature.
2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor.
3. Tolerance:includes set us tolerance,line regulation and load regulation .
Label
Mechanical Specification
FAQ
Do all of these units have protection from thermal overload (excessive heat), voltage overload, short circuit, and power surge?
Answers: Yes, all of those units have the protection from thermal overload (excessive heat), voltage overload, short circuit, and power surge.
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
