Rack Mount Solar Inverter 5500W
CNR110 5500-48 5.5KW 48VDC
INTRODUCTION
This is a multi-function inverter/charger, combining functions of inverter, solar charger and battery
charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user- configurable and easy-accessible button operation such as battery charging current, mains/solar charger priority, and acceptable input voltage based on different applications.
Features:
• Pure sine wave inverter.
• Configurable mains input voltage range for home appliances and personal computers via load requirements.
• Configurable battery charging current based on load requirements.
• Configurable Mains/Solar Charger priority via LCD setting.
• Compatible to mains input and generator input.
• Auto restart while mains is recovering.
• Overload/Over temperature/ short circuit protection.
• Smart battery charger design for optimized battery performance.
• Cold start function.
• Remote monitor function via SNMP Card(optional)
Basic System Architecture
The following illustration shows basic application for this solar inverter. It also includes following devices to have a complete running system:
• Generator or Mains.
• PV modules.
Consult with your system integrator for other possible system architectures depending on your requirements.
This inverter can power all kinds of appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioner.
Figure 1 Hybrid Power System
Product Overview
1. LCD display
2. Function Keys
3. Status indicator
4. Charging indicator
5. Fault indicator
6. Power ON/OFF switch
7. Breaker
8. Mains input
9. Mains output
10. RS-232 communication port
11. PV input
12. Battery Positive Industrial Connector
13. Battery Negative Industrial Connector
14. SNMP smart card slot
Technical Parameters:
| Rated Output Power |
3.5KW |
5.5KW |
| Output Voltage Waveform |
Pure Sine Wave |
| Output Voltage Regulation |
230Vac±5% |
| Output Frequency |
50Hz |
| Peak Efficiency |
93% |
| Overload Protection |
5s@±150%load; 10s @110%～150%load |
| Surge Capacity |
2* rated power for 5 seconds |
| Nominal DC Input Voltage |
24.0Vdc |
48.0Vdc |
| Cold Start Voltage |
23.0Vdc |
46.0Vdc |
Low DC Warning Voltage
load<50%
load≥50% |
23.0Vdc |
46.0Vdc |
| 22.0Vdc |
44.0Vdc |
Low DC Warning Return
Voltage
load<50%
load≥50% |
23.5Vdc |
47.0Vdc |
23.0Vdc |
46.0Vdc |
Low DC Cut-off Voltage
load<50%
load≥50% |
21.5Vdc |
43.0Vdc |
21.0Vdc |
42.0Vdc |
| High DC Recovery Voltage |
32.0Vdc |
62.0Vdc |
| High DC Cut-off Voltage |
33.0Vdc |
63.0Vdc |
No Load Power
Consumption |
<35W |
| Safety Certification |
CE |
| Operating Temperature Range |
-10℃ to 50℃ |
| Storage temperature |
-15℃~60℃ |
| Humidity |
5%~95% Relative Humidity (Non-condensing) |
| Dimension (D*W*H), mm |
300x110×475 |
| Gross weight(kg) |
10.5 |
11.5 |
Mounting the Unit:
Read this manual carefully and familiarize yourself with the installation procedures before installing.
• Be very careful when installing the battery, and wear protective goggles when installing lead-acid liquid battery. Once in contact with the battery acid, rinse the contact part with water in time.
• Avoid placing metal objects near the battery to prevent a short circuit.
• Acidic gases may be generated when the battery is charged, so make sure the environment is well ventilated.
• When installing the cabinet, be sure to leave enough space around the machine for heat dissipation; do not install the machine and lead-acid liquid battery in the same cabinet, so as to avoid the acid gas generated when the battery works that may corrode the machine.
• Only charge the battery that meets the requirements of this all-in-one machine.
• The false connection points and corroded wires may generate great heat that may melt the wire insulation, burn the surrounding material, or even cause fire, so male sure that the connectors are tightened, and the wires should be fixed with ties to avoid shaking when moving the machine, causing the connectors to be loose.
• The system connection wires should be selected according to the current density of not more than 5A/mm2.
• When installing outdoors, avoid direct sunlight and rainwater infiltration.
• When the power is turned off, there is still a high voltage inside the machine, so do not open or touch the internal components and wait for the capacitor runs out of power.
• Do not install the all-in-one machine in harsh environments such as wet, greasy, flammable, explosive or dusty.
• Do not reverse the polarity of the battery input end of this product, otherwise the equipment may easily damaged or unpredictable danger may occur.
• The mains input and AC output are high voltage, so do not touch the wire connections.
• When the fan is working, do not touch to prevent injury.
• It is necessary to confirm that it is the only input device for loads as needed and it is prohibited to use it in parallel with other input AC power to avoid damage.
X
Gold Supplier
