Outdoor mobile STATCOM

Sales Outdoor mobile STATCOM

ZDDQ Outdoor Mobile STATCOM is a modular system from 6kv to 35kv, supplies reactive power to distribution grids with high regulating dynamics, and carries out regulating tasks such as voltage regulation or influencing the flow of reactive power.

Product Detail  

OVERVIEW of HV SVG/STATCON

ZD-HVSVG series ourdoor mobile STATCOM using IGBT as the core power modules which can quickly and continuously provide capacitive or inductive reactive power, achieve constant reactive power, constant voltage and constant power factor control through the assessment point, and ensure the power grid is running stable, high efficiency and high quality. In the power distribution network, the small capacity HV SVG/ STATCOM can significantly improve the power quality (improve the power factor, overcome phase imbalance, eliminate voltage flicker and fluctuation, restraining harmonic), if it is installed in some special loads (such as electric arc furnace).

HV SVG/STATCOM  products use advanced instantaneous reactive power theory and power decoupling algorithm as the theory foundation, and adopt many technology such as modern power electronics, automation, micro-electronics and network communication. It can set reactive power nature and size, power factor and grid voltage as the control target, track power quality dynamically, adjust reactive power output, achieve setting curve and improve power quality.

outdoor high voltage svg/statcom
high voltage static synchronous compensator
                                               Outoor mobile statcom                                                                    Outoor container HV SVG


Outdoor HV SVG/STATCOM SPECIFICATIONS

Rated capacity ±1~±42Mvar
Rated work voltage 6kV~35kV
Rate frequency 50/60HZ
Over-load capacity more than 1.2 times overload
Response time ≤5ms
Active power loss ≤0.8%
Total harmonic distortion ≤3%
Control power 380VAC, 220VAC, or 220VDC
Reactive power regulation Compensate inductive and capacitive Vars continuously and smoothly.
The start regulated reactive power 5kvar
The resolution of compensate current 0.5A
Communication interface Ethernet, RS485, CAN, high-speed optical communication interface
Communication protocol MODBUS_RTU, ProfiBUS, CDT91, IEC61850-103/104, CANOPEN, User-defined,can be set on HMI.
Storage temperature -30℃~+70℃
Operating temperature -10℃~+40℃
Relative humidity  month average value no more than 90% , no frost
Altitude <2000m(more than 2000m need to customize)
Seismic intensity 8 degree


SVG/STATCOM Main Features

HV SVG series SVG/STATCOM  with high performance, high reliability is designed to meet users’ demands of improving power factor of power transmission, compensating harmonic and the negative sequence of current. It is easy to operate. Its features are as follows,

power cell of static synchronous compensator power moldular of high voltage svg
                   POWER CELL OF HV SVG                                                                                   POWER CELL OF HV SVG

■Better control for power grids, better load compensation, better power factor improvement

SVG/STATCOM increase system stability and power quality by providing voltage control and support, reactive power control, power oscillation damping, and increased power transfer capacity. STATCOM enables electro-intensive industrial processes to obtain a grid connection by controlling flicker level, harmonic voltage distortion, and voltage unbalance. STATCOM also allows renewables to be connected to the grid in compliance with grid code requirements by providing fault ride through support and voltage control.

Optimal stability and quality

SVG/STATCOM is geared to quickly inject significant inductive or capacitive power. Thus the STATCOM provides improved dynamic stability of transmission systems to reduce the risk of voltage collapse and blackout while avoiding deterioration of the power quality due to its multilevel configuration: generating unwanted harmonics is widely avoided.

■In harmony with harmonics – and best flicker reduction

Harmonics generation is low due to the use of MMC technology, resulting also in low noise emissions.

The extremely fast control of  SVG/STATCOM allows in industrial applications highly efficient flicker reduction and even active reduction of the lower harmonics caused by a nonlinear load such as an electric arc furnace.

■Fastest response – efficient solution

The standardized component design allows minimized engineering efforts and provides an overall fast, efficient, modular, and cost-effective solution.

ZDDQ  SVG/STATCOM control with its most advanced concept offers unsurpassed speed in controlling the IGBT semiconductors to precisely generate the desired flow of energy between the converter and the feeding network.

Inside of static synchronous compensator
inside of static synchronous compensator container

                                              Internal of HV SVG/STATCOM                                                                  Reactors in  STATCOM                      

Outdoor 6KV SVG/STATCOM

Model

Rated voltage

 (kV)

Rated capacity

(Mvar)

Dimension Remark Weight
Width
Height Depth
 (mm) (mm) (mm)
HV SVG-C1.0/6-O     6 1 5200 2560 2438 Iron core Reactors 4450
HV SVG-C1.5/6-O 1.5
HV SVG-C2.0/6-O 2 4850
HV SVG-C3.0/6-O 3
HV SVG-C4.0/6-O 4 5450
HV SVG-C5.0/6-O 5
HV SVG-C6.0/6-O 6 5750
HV SVG-C7.0/6-O 7 6700 Hollow    Reactors 6450
HV SVG-C8.0/6-O 8 6600
HV SVG-C9.0/6-O 9 6700
HV SVG-C10.0/6-O 10 6800
HV SVG-C11.0/6-O 11 6900
HV SVG-C12.0/6-O 12 7000


Typical Application Fileds of HV SVG/STATCOM

Electric Arc Furnaces – voltage stabilisation reduces tap-to-tap time and electrode consumption.

Rolling Mills – elimination of voltage and harmonic distortions reduces reactive power demand and increases electrical system capacity.

Mining and heavy industry – dynamic reactive power compensation stabilise the power system, especially on large motor start up, ensuring reliability of the power system.

Wind and solar farms – meeting strict grid connection criteria by providing dynamic voltage control and voltage stability at the common coupling point (PCC).

Renewables markets – including solar farms, wind farms, solar panel installations.









Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.