Certificate: FDA / 510K(K161907) / CE

Guidelines For Use

1. Connect the mains lead to the IEC power inlet socket. Insert the mains plug of the lead into a standard 220 V mains socket.

2. Fit the air feed hose(s) to the air outlets, as described above. Ensure that all connections to the pump and garment make a good seal.

3. Place / Fit the garment(s) onto the limb(s) requiring treatment.

4. Turn the unit on. A visual mains indicator will illuminate.

5. Select the required pressure using the pressure control.

6. Set up the inflate and deflate times as required.

7. Note the time of the treatment starts so that the unit can be switched off when the desired time has elapsed.

8. DO NOT unzip the garment when the unit is switched on. This may cause damage to the garment. Always turn off the power before unzipping the garment.

9. Extra comfort can be obtained by first placing a length of tubular bandage on the limb under the pressure garment.