Mini type 1+2 surge protector devices PCB use DC SPD

Sales

Type 1+2 DC surge protector

In:20kA

Imax: 40kA

Iimp:3kA

Low voltage Up

Internal disconnection, statue indicator, and remote signaling

IEC 61643-11

OEM/ODM SPD manufacturers

Sungrow, Goodwe, Growatt supplier, work with Huawei

Product Detail

PCB type SPD DC 670V 20KA , offering to Sungrow, Goodwe, Gtowatt

PCB type surge protection device is voltage-limiting type SPD and mainly used to prevent surge overvoltage in AC/DC power supply circuite, which equipped with safety disconnection device and status indicator. Normally, the indicator window is green, and will turn to red under malfunction and generate remote alarm signaling.

Application

It is applicable to 220V/380V AC power system or 670V (＜670V）DC system. In=10kA, Imax=20kA, and it is soldered directly onto PCB of various electrical and electronic equipment,such as AC circuitt of charging pile, inverter, communication equipment, household appliances etc, as the second or third stage protection.

Features

* DC series

* Reliable thermal tripping protection

* Status indicator

* Low voltage protection level

* Optional remote signaling

* Easy for automatic soldered

* Apply to protection for inverter, charge pile, etc

Model	GTSP-MDV670/20/A
Descrpition	Mini size PCB SPD
Max. DC operating voltage (Uc)	670V
Nominal discharge current In(kA)	20kA
Max. Discharge current Imax (kA)	40kA
Lightning impluse current Iimp (kA)	3kA
Protection level Up (kV)	≦2.3kV
Dimensions	34.914.227.4MM (not including the pin)
Protection rating	IP 20
Response time tA (ns)	≦25
Oeprating temperature	-40/+85℃
Mounting	Soldered onto PCB
Housing material	PBT
Standards compliance	IEC64643-11, GB/T18802.11