Hoymiles 600W Micro Inverter WIFI Communication Inverter for Home On-grid Solar Energy System

Sales

(2 IN 1 UNIT )The 600W micro inverter with reactive power control for 2 solar panels. It can realize solar panel independently monitor.One microinverter can connect two solar panels.

Developing Clean, Affordable，Reliable and Efficient (CARE) products for our customers worldwide.

The microinverters have an isolation transformer and basic isolation between the DC input and the AC output network.

Warranty : 10years/25years(optional)
Certificate : TUV,UL,IEC,CE,SGS

Product Detail

FOTOVO 2MPPT design solar power microinverter

Product Details

Low cost $watt micro inverter
Single microinverter connects two PV modules with individual MPPT
High continuos output power up to 600Wac, recommended for dua max 460W solar panel
Globaly certified for UL1741,SAA,TUV, VDE-AR-N 4105, VDE0126,G83/2,CEL 021,IEC61727,EN50438
Peak output power up to 600W; Adapted to 60 & 72 cells PV panels
Peak efficiency 96.70%; CEC weighted efficiency 95.50%
Static MPPT efficiency 99.80%; Dynamic MPPT efficiency 99.76% in overcast weather
High reliability; NEMA6 (IP67) enclosure; 6000V surge protection
Integrated monitoring and power line communicationwith RDG-256 gateway,built-in WiFi
Integrated grounding for easy installation

Solar System Wiring Diagram

How to Apply Microinverter in an AC-Coupled Solar Battery System?

① AC-coupled solar battery system as shown , is the connection of a battery energy storage system to a solar system via AC (alternating current) electricity.

② Energy from a solar system is generated in the form of DC (direct current) electricity which is then turned into AC by the solar microinverters.

③ A battery bi-directional / multimode inverter connected to the same electrical network via AC then converts any spare energy not used by the home back into DC so it can be stored in a battery.

The AC-coupled solar battery system is more complicated than the traditional grid-tied PV inverter system. But this kind of system can even work when grid outage or the system is the type of off grid.

For now, more and more manufacturers have launched AC-coupled solar battery system. Some of these solutions are integrated PV inverters, which others require the installers to select the grid-tied PV inverters to integrate with their battery system.

Technical Parameter

INPUT (DC)	Max Recommended PV Power (Wp)	460*2
	Max DC Open Circuit Voltage (Vdc)	60
	Max DC Input Current (Adc)	14*2
	MPPT Tacking Accuracy	>99.5%
	MPPT Tracking Range (Vdc)	22-55
	Isc PV (absolute maximum) (Adc)	18*2
	Maximum Inverter Backfeed Current to the Array（Adc）	0
OUTPUT( AC)	Peak AC Output Power(Wp)	600（continuous）
	Nominal Power Grid Voltage (Vac)	230
	Allowable Power Grid Voltage (Vac)	configurable
	Allowable Power Grid Frequency (Hz)	configurable
	THD	<3%(at rated power)
	Power Factor (cos phi, fixed)	>0.99%
	Rated Output Current (Aac)	2.6
	Current (inrush) (Peak and Duration)	24A,15us
	Nominal Frequency (Hz)	50
	Maximum Output Fault Current (Aac)	4.4A peak
	Maximum Output Overcurrent Protection (Aac)	10
	Maximum Number of Units per Branch (20A)(ALL NEC adjustment factors have been considered )	6
SYSTEM EFFICIENCY	Weighted Averaged Efficiency (CEC)	95.50%
SYSTEM EFFICIENCY	Night Time Tare Loss (Wp)	0.11
PROTECTION FUNCTIONS	Over/Under Voltage Protection	YES
	Over/Under Frequency Protection	YES
	Anti-Islanding Protection	YES
	Over Current Protection	YES
	Reverse DC Polarity Protection	YES
	Overload Protection	YES
	Protection Degree	IP-67
	Ambient Temperature	-40℉to+149℉(-40℃to+65℃)
	Operating Temperature	-40℉to+185℉(-40℃to+85℃)
	Display	LED LIGHT
	Communications	Power Line Communication
	Dimension (W-H-D mm)	10.91’5.20’1.97’(27713250mm)
	Weight (Kg)(including AC cable)	6.4 lbs.(2.9kg)
	Environment Category	Indoor and Outdoor
	Wet Location	Suitable
	Pollution Degree	PD 3
	Overvoltage Category	II (PV), III (AC MAINS)
	Product Saftey Compliance	IEC/EN 62109-1 IEC/EN 62109-2
	Grid Code Compliance* (Refer to the label for the detailed grid code compliance)	VDE-AR-N4105* VDE V0126-1-1/A1 G83/2,CEI021 AS 4777.2 &AS4777.3,EN50438

Microinverter Advantages

1.Safer:The solar panels are connected in parallel, and the system has no DC high voltage.

2.No cask effect, more power generation:The solar panels are independent from each other, without cask effect,

and the actual system efficiency can be maximized.

3.Wide range of application:A good solution to the multi-orientation, shaded roof system; Surrounding environment dust, flying flocculant more complex scene.

4.Simple system:The combination of PV moduels and micro inverter is modular, which simplifies design and construction and reduces system cost.

5.Flexible system design:Allow the design and connection of solar panels which has different powers, brands and types in the same system.

6.Smart monitoring:PV module-level monitoring to reduce later operation、maintenance and repair costs.

7.Long service life:The service life of the micro-inverter is up to 25 years, and the comprehensive investment cost is lower than the traditional system, and the cost performance is higher.

Package