DMX led driver waterproof led power supply 12v 150w for colorful lights

Sales DMX led driver waterproof led power supply 12v 150w for colorful lights

Manufactured exclusively for Hidea, SMT-12150-5C-A is a DMX led driver 150w 12v with 5 channels outputs, suitable for powering GlowbackLED LED strip and linear lighting products
  • Working Mode : Constnat Voltage LED Driver
  • Output Voltage : 12/24/48Vdc
  • Shape & Size : Stardard Size
  • Output Power(Watt) : 150W
  • Input Voltage : 100-277Vac
  • Dimming Mode : DMX Dimming
  • Size : 277x78x25MM
  • Weight : 1000g
  • Certification : UL/CUL
  • Warranty : 7 Years

Product Detail  

This DMX led driver 150w 12v has a maximum load of 150 watts, no minimum power load; dimming works equally well whether powering Maxtar single color or multi-color LED tape lighting. The sealed driver allows for indoor or outdoor use.

  Specification  

Model SMT-12150-XC-A SMT-24150-XC-A
X=1 , 2,  3,  4,  5 for DIM (DW);  CCT(TW);  RGB;  RGBW;  RGBW+CCT (RGBCW)
  DC Voltage 12V 24V
Voltage Tolerance ±0.5V
Voltage Regulation ±0.5%
Rated current CH1+CH2+CH3+CH4+CH5=12.5A CH1+CH2+CH3+CH4+CH5=6.25A
Rated power 150W
Load Regulation ±2%
Input Voltage Range 100-277VAC
Frequency Range 47-63Hz
PowerFactor(Typ.)@ full load PF≥0.97@230VAC
THD(Typ.)@ full load ≤10%

Efficiency(Typ.)@full  load

91%@230VAC 92.5%@230VAC
AC Current(Max.) 1.85A 1.85A
Inrush Current(Typ.) 88A (Twidth 120us measured at 50% I peak, COLD START, 230VAC)
Leakage current <0.50mA
Protection Short Circuit Hiccup mode ,recovers automatically after fault condition is removed
Over Loading ≤120%  Hiccup mode ,recovers automatically after fault condition is removed
Over temperature 100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Environment Working TEMP. -40~+60℃ (see below derating curve)
Working Humidity 20~95%RH, non-condensing
Storage TEMP. Humidity -40~+80℃,10~95%RH
TEMP .coefficient ±0.03%/℃(0~50℃)
Vibration 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes
Safety&EMC Safety standards EN61347-1   EN61347-2-13 (EU)   &  UL8750  UL1310 (US)
Withstand voltage I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC (EU) & I/P-O/P:1.5KVAC(US)
Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSION EN55015  EN61000-3-2 ,3-3 (EU) & FCC Part 15 B (US)  (≥60% loading)
EMC Immunity EN61000-4-2,3,4,5,6,11, EN61547
Others Net Weight 0.75KG
Dimension 277x78x25mm (LxWxH)
packing 10PCS/CTN  
Notes 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation .
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.

  Compatible Light Type  

Cuttable design allows users to adjust the length of Bosco light strip however like, no need for any other devices,simply stick the strip lights on clean, dry surface. start to enjoy strip lighting, 100ft led strips are long enough to reach around your entire room and light the whole place up after connect with DMX led driver 150w 12v.

  Related Products  

led driver 150wThe led power supply 12v 150w constant voltage driver has 4 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure.


Mode:SMT-012-150VDHV2

Dimming Mode : 0-10V Dimming

Output Power : 150W

intput voltage:100-277VAC

Size:260*105*45MM   (L*W*H)



Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.