Smarts Electronics's 80 watt 24 volt outdoor dimming constant voltage LED driversuitable for Zumtobel 24v LEDs application to protects them from line-voltage fluctuations, or for any other 24Volts DC electrical device.
dimming constant voltage LED driver 24v 80w with led power supply junction box
Smarts Electronics's 80 watt 24 volt outdoor dimming constant voltage LED driver suitable for 24v LEDs application to protects them from line-voltage fluctuations, or for any other Hykolity 24Volts DC electrical device. Then all of those Triac dimmable led drivers are paried with realtive junction box.
|
model |
SMT-012-080VT |
SMT-024-080VT |
|
|
Output |
DC Voltage |
12V |
24V |
|
Voltage Accuracy |
±0.5V |
±0.5V |
|
|
Rated current |
6.66A |
3.33A (class 2) |
|
|
Rated power |
80W |
||
|
Input |
Voltage Range |
100~130V AC/170～265V AC |
|
|
Frequency Range |
47～63HZ |
||
|
Power Factor ( Typ.） |
PF≧0.95/110V,PF≧0.96/170V,PF≧0.95/220V,PF≧0.93/265V |
||
|
Full Load Efficiency（Typ.） |
>83% |
>83% |
|
|
AC Current（Typ.） |
0.61A/110VAC 0.58A/170VAC 0.46A/220VAC 0.41A/265VAC |
||
|
Leakage current |
﹤0.25mA/110V/220VAC |
||
|
Protection |
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed. |
|
|
Over voltage |
≦140VAC(90~135V) , ≦270VAC(170~265V) |
||
|
Environment |
Working TEMP. |
-40～+60℃ |
|
|
Working Humidity |
20～90%RH,non-condensing |
||
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||
|
Vibration |
10～500Hz，2G 10min./1 cycle，period for 60min.each along X,Y,Z axes |
||
|
Safety&EMC |
Safety standards |
EN-60950-1, EN61347-1/-2/-13 |
|
|
Withstand voltage |
I/P-O/P:3.75KVAC |
||
|
Isolation resistance |
I/P-O/P：100MΩ/500VDC/25℃/70%RH |
||
|
EMC EMISSION |
Compliance toEN55015,EN61000-3-2 (≧50%load) |
||
|
EMC IMMUNITY |
Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11,EN61547 Alight industry level （surge4KV） |
||
|
Others |
Weight |
0.99Kg |
|
|
Size |
210*68.5*43mm（L*W*H） |
||
|
packing |
324*298*176mm |
||
|
Notes |
1. All parameters NOT specially mentioned are measured at 110V/230VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3.Tolerance:includes set us tolerance,line regulation and load regulation . |
||
| Label |
|
||
 |
 |
 |
 |
Specifications for led driver 24v:
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
