Customized silicone rubber cold shrink tube enRR-CST

Sales

◆IPX8 class, stable and long-life during operation

◆Easy to install, only two steps (Cover, pull)

◆Fast installation, only 15-30 seconds needed to seal one connection

◆No limitation of spare space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,

◆Easy to uninstall, only need knife to cut tube open

◆No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance

◆Much time cost, and labor cost saving

◆Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone

Product Detail

enRR-CST is new silicone rubber cold shrink tube (built-in Rubber Ring) with special appearance. It’s specially designed to improve silicone cold shrink tube’s resistance to puncture and other external damage. It’s a kind of good accessory for weatherproofing protection on cable connections or joint, mostly applied on cell sites, such as connection between jumper cable and connector (7/16 DIN, N type or 4.3-10 connector) on RF equipment (RRU, Antenna and passive device), and joint between feeder and jumper cable. Comparing with tape sealing protection, time of installation is much shorter (15-30 seconds), more convenient, uniform waterproofing quality.

Durable Cold Shrink Tube

Applications

1. It is widely used for waterproof seal in coaxial cables on telecommunication base stations, N-type connector, 1/2 jumper, Din head and 1/2 jumper connector;
2.It can be used as a waterproof seal for cable television connector;
3. It can be used as a waterproof seal for connecting wires and cables;
4.Insulation seal for other types of connection;

Property

Item		Parameter and Result	Test Method
Waterproof	Class	Pass, IPX8	IEC 60529:1989+A1:1999+A2:2013； 1 meter depth in water, duration: 8 hours
Physical and mechanical properties	Shore Hardness	A/41/1	ASTM D2240-15
	Tensile Strength	9.89 MPa	ASTM D412-15aMethod A
	Elongation	910%	ASTM D412-15aMethod A
	Tear Strength	46.2 KN/m	ASTM D624-00(2012)
	Brittleness temperature by impact	Pass	ASTM D746-14
Flammability	Horizontal burning	HB	UL 94-2013 Rev.6-2016 Section 7
Temperature	Installation temperature	-40℃ - 60℃
	Operation temperature	-60℃ - 90℃
	Stock temperature	-60℃ - 90℃

Note：Not for specifications. Values are typical, not to be considered minimum or maximum.

Specification

Mode	I.D (mm)	Relaxed I.D (mm)	Relaxed Length (mm)	Description
enRR-CST-40	≥38	≤12	≥140	Cold Shrink Tube, designed for 1/2" jumper to equipment, only applicable for 7/16 DIN or 4.3-10 connector
enRR-CST-28	≥27	≤12	≥110	Cold Shrink Tube, designed for 1/2" jumper to equipment, only applicable for 4.3-10 or Type N connector
enRR-CST-AISG	≥22	≤10	≥110	Cold Shrink Tube, applicable for AISGcable to RET