Class2 waterproof IP67 mini size 12v 12w smart led driver

Sales

This IP67 LED Driver 12V 12W is a Constant Voltage Class 2 driver. It works in dry, damp, and wet locations. The small size allows for easy mounting under a kitchen cabinet when converting from florescent fixtures to low voltage LEDs, such as with LED LIGHTS CANADA's puck light.

Warranty : 5 Years
Certification : ETL
Weight : 108g
Size : 66*29*20MM
Working Mode : Constnat Voltage LED Driver
Dimming Mode : Non-dimming
Input Voltage : 100-265Vac
Output Power(Watt) : 12W
Shape & Size : Mini Size
Output Voltage : 12/24Vdc

Product Detail

HIDEA produce SMT-012-012VW It is a compact size mini led driver ETL listed. The design and certification of Class 2 12v 12w non dimmable led driver allow direct wiring into the 120V input or 220V input. It can also match good well with KICHER led tape lights.

Specification

MODEL		SMT-012-012VW	SMT-024-012VW
OUTPUT	DC VOLTAGE	12V	24V
	RATED CURRENT	1A	0.5A
	CURRENT RANGE	0~1A	0~0.5A
	RATED POWER	12W	12W
	RIPPLE&NOISE(max)	<700mV	<400mV
	VOLTAGE TOLERANCE	±0.5V	±0.5V
INPUT	VOLTAGE RANGE	90~265VAC
	FREQUENCY RANGE	47~63Hz
	POWER FACTOR(Typ.)
	EFFICIENCY(Typ.)	>81%	>81%
	AC CURRENT(Typ.)	0.20A @110VAC / 0.099A@220VAC
PROTECTION	Short circuit	Protection type:recovers automatically after condition is removed
	Overload	overload protected@145-160% above peak rating
	Over temperature	Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT	WORKING TEMP.	-30~+50℃ (Refer to output load derating curve)
	INGRESS PROTECTION	IP67 design for indoor or outdoor installations
	STORAGE TEMP	-40~+80℃
SAFETY&EMC	SAFETY STANDARDS	EN61347-1;EN61347-2-13;SELV;IP67 UL, CE, ROHS approved
	WITHSTAND VOLTAGE	I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	EMC Test Standards	EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006
		EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006
NOTE	1.All parameters NOT specially mentioned are measured at 110V~220VAC input,rated load and 25℃ of ambient temperature.
	2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.
	3.Tolerance:includes set up tolerance,line regulation and load regulation.

Compatible Light Type

HIDEA manufacture ETL CE ROSH approval waterproof IP67 non dimmable 12v 12w led driver. it is designed to perform safely with led strips lights to the shelving in your great room, such as MIRRORS & MARBEL.