Product introduction:
High blackness, good hiding power, slightly brown phase, full spray preferred
| Model NO. | M-105P | Substrate | Steel |
| Certification | ISO14001 | Tin | Matel and Plastic |
| Appearance | Liquid | Level | Finish Coat |
| Main Raw Material | Acrylic | Method | Spray |
| Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
| Shelf Life | 2Years | Qty/CTN | 12tins |
| Trademark | Meklon | HS Code | 320820 |
Car Refinish Paint 1K High Matt Black Car Paint Wholesale
Performance introduction of 1K automotive paint: 1K is only used as the background color, and it represents a single component paint, usually Suhui Shi primer, which belongs to volatile paint and has no luster after drying.
Introduction to extra black color performance: its blackness is relatively high, and it has a good effect on hiding power. It has a slightly brown color, which is the preferred color for full spraying
If you are interested or have any opinion on it, please feel free to contact me!
Look forward to hearing from you
Basic information on Base Coat:
Base Coat is a paint that is suitable for use before topcoating and provides four main functions:
1. Prevent the metal surface from rusting.
2. Can be used as filling properties.
3. Provide good adhesion to the sub-layer primer and topcoat.
4. Isolate the influence of the old paint layer or primer on the topcoat, and avoid the phenomenon of absorption and reduce the gloss of the Automotive Paint
| Surface Cleaning: | Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities. |
|
The Mixing Ratio： (Volume Ratio) <15℃ 15-30℃ >30℃ |
1K Base Paint + Thinner 100 60-80 C-1K Kase Paint Use Quick-Dryin Type C-1K Kase Paint Use Standard Type C-1K Kase Paint Use Slow-Drying Type |
| Sprsy Viscosity: | 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃) |
|
Recommended Spray Tool and Air Pressure: R P Spray Gun: HVLP Spray Gun: |
Caliber：1.3mm Air Pressure:2.0-2.5(bar) Caliber: 1.3mm Air Pressure:1.8-2.0(bar) |
|
Number of Spray Layers Film Thickneen: Flash time: Rest Time: |
2-3 Level,15-25um At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes After 10-15 Miuntes ,Spray the Varnish |
Customer Feedback
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
