Automatic C Purlin Roll Forming Machine

Sales Automatic C Purlin Roll Forming Machine

Automatic C Purlin Forming Machine can easily change the size in one minute.

Product Detail  

Advantages of Automatic Quick-change C purlin machine :

1.Automatically change different purlin size in one minute, without changing rollers or spacers.
2.Post-cutting design, no worry about twist and flare caused by Pre-cutting design.
3.With computer controlled system which easy to operate and save time and cost .

4.Post-cutting system or fly-cutting for option.

5.We are the first and only factory to have a whole Baking Finishing Line to treat the spare parts.


Send your drawing to us, we can customize it for you.


Profile drawing


Product Specification

Bottom(W) 70-250mm
Height(H) 25-70mm
Small size(E) 10-20mm
Material width(λ) 130-418mm
Material thickness(&) Q2351.3-2.5mm/G350(1.3-2.0mm)
Chain size 1.0 inch +1.2 inch +1.5 inch
Main shaft diameter φ70/55mm Round steel with modulating treatment
Leveling shaft diameter Solid rollers φ85mmupper2, down3
Wall panel thickness 22mm
Machine base size H396*199
Driving power Motor 11.0KW, Helical gear reducer with K series
Punching and cutting power Hydraulic power 5.5KW
Forming speed 20m/min without punching
No. of punching 2 setsDouble+single14*25
Puning and cutting way Pre punching and cutting+ post cutting
Roller material Gcr15
Forming station 4+4+5=13 station(without embossing
Blade material Cr12Mov,Heat treatment after wire cutting
Control mode PLCDelta Taiwan


Machine Parts

1.Feeding material guide and leveling device
Each of our purlin machine has a feeding material guide with two rollers (one up and one down roller), and leveling device with 5 rollers ( 2 up and 3 down rollers ) for straightening. 

solid and shafts diameter=φ85mm


2. Pre-punching system 
Hydraulic punching device with 3 cylinders (one cylinder for single hole and 2 cylinders for dual-holes.)
Also, can make more punching sets as customer’s requires.


3. C purlin machine rollers and shafts
Purlin machine rollers manufactured from bearing steel GCr15, precision machined, hard Chrome Coated;       
All purlin machine shafts manufactured from #45 steel or Gcr15 for optional, 

Main Shaft Diameter=φ80/65mm, quenching and tempering treated


4.C purlin machine post-cutting system:
You don't need to change cutter for different size; 

Further more, you can changing purlin height and bottom width unlimited.
Cutting blades made by high quality mold steel Cr12 with heat treatment.
Cutter frame made from high quality 30mm steel plate by welding.


5. Control System
C purlin machine control box
(Touch screen brand: WEINVIEW, Inverter brand: Finland VOCAN/Taiwan DELTA/ALPHA,  Encoder brand: Japan Koyo/OMRON)


6. Uncoiler
C purlin machine uncoiler 
One set manual uncoiler, Un-powered, manually control steel coil inner bore shrinkage and stop
 Max. feeding width: 500mm, coil ID range 470mm±30mm
Capacity: Max. 3Ton


With hydra uncoiler for your option


7. C purlin exit rack
 Un-powered, three  units



Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.