ANSI 150LB Stainless steel wafer check valve

Sales ANSI 150LB Stainless steel wafer check valve

Stainless steel sandwiched check valve is also known as reverse flow valve, check valve, back pressure valve, one-way valve.This kind of valve depends on the flow of the medium itself in the pipeline and automatically open and close the force, belongs to a kind of automatic valve.

Product Detail  

ANSI 150LB Stainless steel wafer check valve

Stainless steel wafer check valveis also known as reverse flow valve, check valve, back pressure valve, one-way valve.This kind of valve depends on the flow of the medium itself in the pipeline and automatically open and close the force, belongs to a kind of automatic valve.Check valves are used in piping systems to prevent backflow of media, to prevent the reversal of pumps and their driving motors, and to prevent the release of media in containers.Check valves can also be used in piping where pressure may rise above the primary system pressure to supply the secondary system.


Check valves can be used on all kinds of media depending on the material.Check valve installed in the pipeline, that is, become one of the complete pipeline fluid components, the disc opening and closing process will be affected by the transient flow state of the system where it is;In turn, the disc's closing behavior has an effect on the flow state.Check valve is characterized by large load variation, small opening and closing frequency, a put into closed or open state, the applicable cycle is very long, and does not require the movement of parts.But once the "switch" requirements, must be flexible, this requirement is more demanding than the common mechanical movement.Due to the check valve in the most practical use, qualitatively determine for fast shut down, and at the instant of the check valve is closed, the medium is a direction, with the disc in closing, the medium from the rapid rate of maximum back down to zero, while the pressure rise rapidly, generating possible damage to pipeline system of "water hammer" phenomenon.For high pressure pipeline system with multiple pumps in parallel, the water hammer problem of check valve is more prominent.Water hammer is a kind of pressure wave in the transient flow in the pressure pipe. It is the hydraulic impact phenomenon of pressure jump or drop caused by the change of fluid velocity in the pressure pipe.The physical reason is the result of the combined action of fluid incompressibility fluid motion inertia and pipe elasticity.In order to prevent the hidden trouble of water hammer in pipeline, over the years, people have adopted some new structures and materials in the design of check valve, which has made gratifying progress in minimizing the impact force of water hammer while ensuring the applicable performance of check valve.Check valve is to rely on the flow of the medium itself and automatically open, close the disc, used to prevent media backflow valve, also known as check valve, one-way valve, reverse flow valve, and back pressure valve.Check valve belongs to a kind of automatic valve, its main function is to prevent the backflow of media, prevent the reversal of pump and drive motor, as well as the release of container media.Check valves can also be used in piping where pressure may rise above system pressure to supply an auxiliary system.Check valves can be divided into swing check valves (rotating according to the center of gravity) and lifting check valves (moving along the axis).


Design Features:

Investment Casting Body

Working pressure:1.6~4.0Mpa

Applicable temperature:-29℃~150℃(300℃)

Applicable Medium:Water,oil gas Etc


Main parts and Materials
ITEM PART MAIN MATERIAL
1 Body WCB CF8 CF8M
2 Bonnet WCB CF8 CF8M
3 Spring CF8 CF8M
4 Disc WCB+D507 304 316

Unit:mm
Main dimensions
SIZE
1.6Mpa
150LB
D H
D H
1/2" DN15 53 25 28 46 25
3/4" DN20
64 28 24 56 31.5
1" DN25
71 30 29 65 35.5
1-1/4" DN32
82 34 34 74 40
1-1/2" DN40
91 39 41 84 45
2" DN50
107 44 49 103 56
2-1/2" DN65
127 55 57 122 63
3" DN80
141 60 71 135 71
4" DN100
162 72 81 173 80
5" DN125
191 80 98 195 110
6" DN150
216 100 - 220 125
8" DN200
270 118 - 277 160
10“ DN250
322 134 - 337 -
12” DN300
373 158 - - -

Packing & Delivery :

Packing Details : all by seaworthy plywood case and packed strongly by  packing belt as below

Delivery Details : Generally it is 5-10 days if the goods are in stock. or 15-30 days if the goods are OEM or not enough

subject to the order quantity. But anyway,normally, we are able to make sure the delivery will not exceed 45 days.

Tags :
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.