AC to DC 24V 90W Constant voltage LED power supply

Sales AC to DC 24V 90W Constant voltage LED power supply

AC to DC 24V 90W Constant voltage LED power supply
  • Working Mode : Constant Voltage
  • Output Current : 3.75A
  • Output Voltage : 24VDC
  • Input Voltage : 100-265V
  • Certification : ETL CE ROHS
  • Warranty : 2 years

Product Detail  

Product name:AC to DC 24V 90W Constant voltage LED power supply


SPECIFICAION
MODEL SMT-012-090VW SMT-024-090VW
OUTPUT DC VOLTAGE 12V 24V
RATED CURRENT 7.5A 3.75A
CURRENT RANGE 0~7.5A 0~3.75A
RATED POWER 90W 90W
RIPPLE&NOISE(max) 150mV 140mV
VOLTAGE TOLERANCE ±0.5V ±0.5V
SETUP RISE TIME 80ms/110VAC
HOLD UP TIME(Typ.) 60ms/110VAC
INPUT VOLTAGE RANGE 100~265VAC
FREQUENCY RANGE 50~60Hz
POWER FACTOR(Typ.)
EFFICIENCY(Typ.) ﹥83%
AC CURRENT(Typ.) 0.92A/110VAC, 0.86A/220VAC
INRUSH CURRENT (Typ.) COLD START 50A/110VAC, 220VAC
PROTECTION Short circuit Protection type:recovers automatically after condition is removed
Overload overload protected@145-160% above peak rating
Over temperature Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT WORKING TEMP. -30~+50℃ (Refer to output load derating curve)
WORKING HUMIDITY 20~99% RH non-condensing(Waterproof IP67)
STORAGE TEMP.,HUMIDITY -40~+80℃,10~99%RH
SAFETY&EMC SAFETY STANDARDS CE UL Mark(LVD) 
WITHSTAND VOLTAGE I/P-O/P:1.5KVAC  IP-GND:1.5KVAC
EMC Test Standards EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006
NOTE 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature.
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
 Label  12V 90W Constant voltage LED power supply
Click Send Email for Details
Click skpye 24 hours Online Reply
Scan to start our communication
Back to top




 Features 


1. High efficiency,save energy ,protected environment.
2. High stability and low ripple, increase light efficiency and decrease light attenuation.
3. Meet to safety standard and EMC
4. Assure LED stability long lift and light efficiency by constant voltage.
5. Integrity protection,over loading, over voltage ,over current.
6. Protections:Short circuit/Overload/Over temperature
7. Cooling by free air convection
8. 100% full load burn-in test.
9. Suitable for LED lighting



 Our Factory 


waterproof LED power supply fot outdoor led illuminating

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.