6pcs Solar Modules Ground Pole Mounting System

Sales 6pcs Solar Modules Ground Pole Mounting System

Jesfer 6pcs panels solar ground pole structure adopt hot galvaized steel Q235 material ,the installation area of modules can up to 8.3㎡ .Unique Poles structure design save installation time and cose ,with its structure can be adjusted from 0 to 60 degrees with screw holes and with some tolerance with west-south,  south-north and east-west directions ,assuring flexible onsite installation to enable best yield for solar panels.

Product Detail  

6pcs Solar Modules Ground Pole Mounting System

Jesfer 6pcs solar panel ground pole bracket included pole support 1508X808MM for 6pcs pv modules ,1pcs pole 140X1490MM,1pcs adjustable bar ,2pcs purlin C100X2600MM ,1pcs beams 80X1300MM and other accessories and fastens.foundation is concrete with pre-buried bolt,the Pole rack system's material used include hot-dip galvanized steel and Anodized AL6005-T5 and  to be applied for the insllation of solar pv projecton uneven lands like hillside,suitable for on-grid system and off-grid system.


Structure

solar pole ground mount system

                                               Single Pole Structure for Solar Energy System


Technical Parameters

 System Name
 Ground Single Pole Rack System
 Panel Layout
 Landscape or Portrait
 Foundation
 Concrete Foundation or Ground Screw
 Material
 Q235B (Hop-Dip Galvanized) ,AL6005-T5(Anodized)

 Tilt Angle

 10-60degrees    
 Fastener
 Hop Dip Galvanized & SUS304
 Snow Load
 1.3KNhttps://www.jesferindustry.com/㎡   
 Color
 Customized or Silver
 Wind Load  32mhttps://www.jesferindustry.com/s  Design Standard
 ANhttps://www.jesferindustry.com/NZS1170,DIN1055,JIS C8955,etc.
 Applicable Solar Module
 Framed or Frameless
 Warranty
 10 Years  
 Ground Clearance  200-2000mm  Small Components  Anodized AL-6005-T5


Project Reference

Solar Racking


Warranty

1.Quality Standards

The production shoud be conducted with the local "National Industrial Production Standards" and fully meets the local calculation requirements. We mainly use high-quality stainless steel 304 and 6005 grade high-strength aluminum alloy materials.

2.Warranty Period

In order to make it easy for customers to use Jesfer products, Jesfer solar provides a 10-year quality guarantee for all mounting racks, during which the company shall be liable for defects in materials and workmanship.

3.Warranty Conditions and Contents

Jesfer Solar guarantees that at the time of goods delivery conditions, all components of the supplied products should be 100% new products and the raw materials are brand new materials, and resolutely resist scrap aluminum and iron. If it is reasonably proved that the product is defective from the date of delivery to the date of delivery, Jesfer Solar shall repair or replace the defective product. At the end of the warranty period, the product must be installed in accordance with the customer's design requirements and installed in accordance with Jesfer's written installation instructions, and then the construction party's insulation and construction quality inspections.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.