6.6kv Indoor Static Synchronous Compensator/STATCOM/SVG

Sales 6.6kv Indoor Static Synchronous Compensator/STATCOM/SVG

A Static Synchronous Compensator/STATCOM/SVG is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

Product Detail  

Overview of Static Synchronous Compensator/STATCOM/SVG

ZDDQ 6.6kv Indoor Static Synchronous Compensator/SVG/STATCOM, a Voltage source converter (VSC) based modern compensation system, can act as a source or sink for reactive power(inductive and ccapacitive). It consists of a controllable part that can operate as capacitive and inductive power and keeps the reactive power flow constant in the system. If there is a need for reactive power in the supply grid, ZDDQ STATCOM can provide instant reactive power support to stabilize the grid. On contrary situation, it absorbs the additional VArs to ensure the stability of the grid.

With pulse-width modulation (PWM), voltage source converter provides faster converter control, which is pre-requisite for excellent flicker reduction. The fixed capacitor banks can be implemented in the system when inductive reactive power demand is less than capacitive.

ZDDQ STATCOM solution comes with advanced Control and Protection system. Equipped with modern touched screen user-interface(HMI),  Our Control and Protection system provides excellent performance for voltage stabilization, flicker reduction, reactive power control, harmonics mitigation and power factor control.

Static Synchronous Compensator
indoor Static Synchronous Compensator
              Indoor HV STATCOM  air cooiling                                                                                          Indoor HV STATCOM


STATCOM Technical Specificaiton

Rated capacity ±1~±42Mvar
Rated work voltage 6kV~35kV
Rate frequency 50/60HZ
Over-load capacity more than 1.2 times overload
Response time ≤5ms
Active power loss ≤0.8%
Total harmonic distortion ≤3%
Control power 380VAC, 220VAC, or 220VDC
Reactive power regulation Compensate inductive and capacitive Vars continuously and smoothly.
The start regulated reactive power 5kvar
The resolution of compensate current 0.5A
Communication interface Ethernet, RS485, CAN, high-speed optical communication interface
Communication protocol MODBUS_RTU, ProfiBUS, CDT91, IEC61850-103/104, CANOPEN, User-defined,can be set on HMI.
Storage temperature -30℃~+70℃
Operating temperature -10℃~+40℃
Relative humidity Month average value no more than 90% , no frost
Altitude <2000m(more than 2000m need to customize)
Seismic intensity 8 degree


Main Features of STATCOM

STATCOM product with high performance, high reliability is designed to meet users’ demands of improving power factor of power transmission, compensating harmonic and the negative sequence of current. It is easy to operate. Its features are as follows,

■Better control for power grids, better load compensation, better power factor improvement

STATCOM increase system stability and power quality by providing voltage control and support, reactive power control, power oscillation damping, and increased power transfer capacity. STATCOM enables electro-intensive industrial processes to obtain a grid connection by controlling flicker level, harmonic voltage distortion, and voltage unbalance. STATCOM also allows renewables to be connected to the grid in compliance with grid code requirements by providing fault ride through support and voltage control.

Optimal stability and quality

The STATCOM is geared to quickly inject significant inductive or capacitive power. Thus the STATCOM provides improved dynamic stability of transmission systems to reduce the risk of voltage collapse and blackout while avoiding deterioration of the power quality due to its multilevel configuration: generating unwanted harmonics is widely avoided.

■In harmony with harmonics – and best flicker reduction

Harmonics generation is low due to the use of MMC technology, resulting also in low noise emissions.

The extremely fast control of STATCOM allows in industrial applications highly efficient flicker reduction and even active reduction of the lower harmonics caused by a nonlinear load such as an electric arc furnace.

■Fastest response – efficient solution

The standardized component design allows minimized engineering efforts and provides an overall fast, efficient, modular, and cost-effective solution.

ZDDQ STATCOM control with its most advanced concept offers unsurpassed speed in controlling the IGBT semiconductors to precisely generate the desired flow of energy between the converter and the feeding network.

hv svg/statcom/statcon power cell of hv svg statcom

                                                           POWER CELL OF HV STATCOM                                     POWER CELL OF HV STATCOM


Indoor 6.6KV STATCOM

Model

Rated 

voltage (kV)

Rated 

capacity (Mvar)

Size


Remark


Weight

(kg)

width

(mm)

height

(mm)

depth

(mm)

HV SVG-C1.0/6





6.6






1.0


3100









2400













1400







Iron core

reactor


2450

HV SVG-C1.5/6

1.5

HV SVG-C2.0/6

2.0

2850

HV SVG-C3.0/6

3.0

HV SVG-C4.0/6

4.0


3800

3450

HV SVG-C5.0/6

5.0

HV SVG-C6.0/6

6.0


3600

Hollow

reactor

2750

HV SVG-C7.0/6

7.0

3450

HV SVG-C8.0/6

8.0



5600



4600

HV SVG-C9.0/6

9.0

4700

HV SVG-C10.0/6

10.0

4800

HV SVG-C11.0/6

11.0

4900

HV SVG-C12.0/6

12.0

5000


STATCOM Application in Typical Industries

Electric Arc Furnaces – voltage stabilisation reduces tap-to-tap time and electrode consumption.

Rolling Mills – elimination of voltage and harmonic distortions reduces reactive power demand and increases electrical system capacity.

Mining and heavy industry – dynamic reactive power compensation stabilise the power system, especially on large motor start up, ensuring reliability of the power system.

Wind and solar farms – meeting strict grid connection criteria by providing dynamic voltage control and voltage stability at the common coupling point (PCC).

Renewables markets – including solar farms, wind farms, solar panel installations.









Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.