5V PWM Output 360° Detection Angle ON/OFF Control Motion Sensor
Technical date of ON/OFF sensor:
| Operating voltage | 12VDC±5% |
| Operating current | <30mA |
| Output | 5V PWM |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Operating temperature | -20°C~+60°C |
| Warranty | 5 years |
Application:
|
In a well-lit environment, it can detect the movement of objects in time and still keep the lights off |
|
When the external environment starts to dim and is lower than the preset light sensitivity value, the motion of an object is detected. The sensor then controls the lamp and keeps the light on |
|
When the moving object leaves the detection area, the lamp will enter the delay stage (keep the brightness when triggered). After the delay time, the lamp will keep the off state and wait for the next trigger. |
| Detection area | 100% |
| Hold time | 1min |
| Daylight threshold | 10Lux |
| Mounting height | Max,4m/13.12ft (ceiling mounted) |
| Detection range |
Radius,3-6m (Ceiling mounted)
|
| Detection angle | 150°(wall mounted),360°(ceiling mounted) |
| Motion detection | 0.5~1.5m/s |
1.Detection pattern(for ceiling mounting)
Mounting height:Max,4m/13.12ft (ceiling mounted)
2.Dimensions pattern
Sensor size:20*24*7.5mm
3.Wiring diagram
The output signal is 5v PWM output.
4.Mechanical structure
The output singal is 5V PWM.
Features of Sensor:
1. The test mode can be entered by switching continuously 3 times within 3s.
2.Factory settings are written into the sensor through the software(Detection range is 100%,Hold time is 1min,Daylight threshold is 10 Lux).
3. The output signal is 5v PWM output.
4. The size of bare board is 20*24*7.5mm,can be used for various types of lamps.
5. 5 years warranty.
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
