2K Car Repair Good Hiding Power Solid Colors Orange Red Car Paint

Sales 2K Car Repair Good Hiding Power Solid Colors Orange Red Car Paint

Product introduction: This 1K Good Hiding Power Car Paint product has the effect of Orange-red to yellowish, bright and bright, high saturation, lead and chromium

Product Detail  

 

Model NO. C-223 Substrate Steel
Certification ISO14001 Tin Matel and Plastic
Appearance Liquid Level Finish Coat
Main Raw Material Acrylic Method Spray
Specification 1L, 3.75L / 2L, 2.5L / 4L, 5L Components Resin,Solvents, Pigment &Auxiliaries
Shelf Life 2Years Qty/CTN 12tins
Trademark Meklon HS Code 320820

 

 

C-2K 222 Car Paint

 

Product Features1K Good Hiding Power Car Paint It is composed of a variety of weather-resistant resins with high quality and strong covering power.It can be formulated into one component base paint with various plain colors, metal effects and pearl effects, and has excellent interlayer adhesion.

Applicable Substrate: 1K Good Hiding Power Car Paint  After sanding, completely dry old paint layers and painted surfaces in the Ferrari range, etc.

 

 

Basic information on Base Coat:

 

Base Coat is a paint that is suitable for use before topcoating and provides four main functions:

1. Prevent the metal surface from rusting.

2. Can be used as filling properties.

3. Provide good adhesion to the sub-layer primer and topcoat.

4. Isolate the influence of the old paint layer or primer on the topcoat, and avoid the phenomenon of absorption and reduce the gloss of the  Orange Red Car Paint

 

Surface Cleaning: Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities.

The Mixing Ratio

(Volume Ratio)

<15℃

15-30℃

>30℃

1K Base Paint  + Thinner

         100                60-80

C-1K Kase Paint  Use Quick-Dryin Type

C-1K Kase Paint  Use Standard Type

C-1K Kase Paint  Use Slow-Drying Type

Sprsy Viscosity: 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃)

Recommended Spray Tool and Air Pressure:

R P Spray Gun: 

HVLP Spray Gun:

Caliber1.3mm   Air Pressure:2.0-2.5(bar)

Caliber:  1.3mm  Air Pressure:1.8-2.0(bar)

Number of Spray Layers Film Thickneen:

Flash time:

Rest Time:

2-3 Level,15-25um

At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes

After 10-15 Miuntes ,Spray the  Varnish

 

 

Customer Feedback

 

 

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.