Fully Automatic C Purlin Roll Forming Machine

Sales Fully Automatic C Purlin Roll Forming Machine

Quickly and Easily change of automatic c purlin forming machine can help to save your time and money.

Product Detail  

Advantages of Automatic Quick-change C purlin machine :
1.Automatically change different purlin size in one minute, without changing rollers or spacers.
2.Post-cutting design, no worry about twist and flare caused by Pre-cutting design.
3.With computer controlled system which easy to operate and save time and cost .
4.Post-cutting system or fly-cutting for option.


We are the first and only factory to have a whole Baking Finishing Line to treat the spare parts. 


Product Specification

Bottom width(W) 100-300mm
Height(H) 30-80mm
Small side(E) 10-20mm
Material width(λ) 178-485mm
Material thickness(&) Q2351.5-3.0mm/G350(1.5-2.5mm)
Chain size 1.2 inch +1.5 inch +1.75 inch
Main shafts diameter φ80/65mm, round steel with modulating treatment
Leveling shafts diameter Solid rollers φ95mmupper2,down3
Wall panel thickness 25mm
Machine base size H396*199
Driving power Motor 18.5KW, Helical gear reducer with K series
Punching and cutting power Hydraulic power7.5KW
Forming speed 22m/min without punching
No. of punching 2 setsDouble+single14*25
Interchanging way Unlimited change by computer 0.25/0.55KW
Punching and cutting way Pre punching and cutting + post cutting
Roller material Most roller materials are Gcr15,/Leaning roller materials are Cr12
Forming station 4+5+5=14 stations (without embossing
Blade material Cr12Mov, Heat treatment after wire cutting
Control mode PLCDelta Taiwan


Main Parts

1. Feeding material guide and leveling device
Two rollers (one up and one down roller) for material guide and 5 rollers ( 2 up and 3 down rollers ) for straightening. 

solid and shafts diameter=φ95mm


2. Pre-punching system 
Two set of punching device of three cylinders (one cylinder for single hole and 2 cylinders for dual-holes.)
Also, can make three or more punching sets as customer’s requires.


3. C purlin machine rollers and shafts
Rollers are made of bearing steel GCr15, precision machined, hard Chrome Coated; 

Leaning rollers are made by Cr12;      
Shafts manufactured from #45 steel or Gcr15 for optional, Main Shaft Diameter=φ80/65mm, quenching and tempering treated


4. C purlin machine post-cutting system:
No need to change cutter for different size; 

Unlimited specification changing for height and bottom width;
Cutting blades made by high quality mold steel Cr12 with heat treatment
Cutter frame made from high quality 30mm steel plate by welding


5.Control System
C purlin machine control box
(Touch screen brand: WEINVIEW, Inverter brand: Finland VOCAN/Taiwan DELTA/ALPHA,  Encoder brand: Japan Koyo/OMRON)


6.Uncoiler
C purlin machine uncoiler 
One set manual uncoiler, Un-powered, manually control steel coil inner bore shrinkage and stop
Max. feeding width: 500mm, coil ID range 470mm±30mm
Capacity: Max. 3Ton


We also have hydra uncoiler for option


7. C purlin exit rack
 Un-powered, three  units


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.