Quick Change CZ Purlin Roll Forming Machine

Sales Quick Change CZ Purlin Roll Forming Machine

Quick Change CZ Purlin Roll Forming Machine with Taiwan Quality,China Price can change the type from C to Z in ten minute.

Product Detail  

Advantages of Automatic Quick-change C purlin machine :

1.Automatically change different purlin size in one minute, without changing rollers or spacers.
2.Produce Both C and Z purlin. Save place and cost.
3.Post-cutting design, no worry about twist and flare caused by Pre-cutting design.
4.With computer-controlled system which easy to operate and save time and cost.
5.Post-cutting system or fly-cutting for option.

We are the first and only factory to have a whole Baking Finishing Line to treat the spare parts. 


Profile drawing


Product Specification

Bottom Width (W) C:100-300mm/Z:140-300mm
Heigh(H) C:30-80mm/Z:50-80mm
Small side(E) C:10-20mm/Z:10-20mm
Material width(λ) C:178-485mm/Z:260-500mm
Material thickness(&) Q235(1.5-3.0mm)
Chain size 1.0 inch + 1.5 inch + 1.75 inch
Main shafts diameter φ80/65mm Round steel with quenching and tempering treatment
Levelling shaft diameter solid rollers φ100mm(upper2,down3)
Wall panel thickness 25mm
Machine base size H446*199
Driving power Motor 18.5KW
Punching and cutting power Hydraulic 7.5KW
Forming speed 22m/min without punching
No. of punching

2 sets(double+single)14*25

Changing way Unlimited change 0.25/0.55KW
Punching and cutting mode Pre-punching and cutting
Interchanging way Part of rollers are flipped 180 degrees to achieve CZ interchange
roller material Most roller materials are Gcr15,/Leaning roller materials are Cr12
Forming station 19 Stations
Blade material Cr12Mov, Heat treatment after wire cutting
Control mode PLCTaiwan FATEK


Main features

1. Feeding material guide and leveling device

The first part of our CZ purlin fomring machine is the feeding material guide which has two rollers (one up and one down roller)

Then the leveling device: 5 rollers ( 2 up and 3 down rollers ) for straightening and leveling. 

Solid and shafts diameter is φ100mm


2. Pre-punching system

 Two set of punching station with 3 cylinders (one for single hole and 2 for dual-holes.)

Also, we can make three or more punching sets as your requires.


3. C purlin machine rollers and shafts

Rollers manufactured from bearing steel GCr15, precision machined, hard Chrome Coated;       

Shafts manufactured from #45 steel or Gcr15 for optional, 

Main Shaft Diameter=φ80/65mm, quenching and tempering treated


4. CZ purlin machine post-cutting system
While changing the material size, you don't need to change cutter, just rotating the screw. 

You can change the purlin height and bottom width unlimited.
Cutting blades made by high quality mold steel Cr12 with heat treatment
Cutter frame made from high quality 30mm steel plate by welding


5.Control System
C purlin machine control box
(Touch screen brand: WEINVIEW, Inverter brand: Finland VOCAN/Taiwan DELTA/ALPHA,  Encoder brand: Japan Koyo/OMRON)


6.Uncoiler
CZ purlin machine uncoiler 
One set manual uncoiler, Un-powered, manually control steel coil inner bore shrinkage and stop
Max. feeding width: 500mm, coil ID range 470mm±30mm
Capacity: Max. 3Ton


We offer hydra uncoiler for your option


7. C purlin exit rack
 Un-powered, three  units

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.