Type N thermocouple conductor is suitable in the similar atmospheres with type K and the operating temperature is -200-1300℃. Its advantage is thermoelectric stability. The composition of positive(NP) is approximately Ni84.4Cr14.2Si1.4, negative(NN) is Ni95.5Si4.4Mg0.1.
SPECIFICATIONS DETAILS
|
|
EMF(mv) |
||||
|
Specification |
100℃ |
200℃ |
400℃ |
600℃ |
800℃ |
|
NiCrSi(NP) |
1.762~ 1.806 |
3.917~ 3.969 |
8.880~ 8.958 |
14.307~ 14.433 |
20.010~ 20.178 |
|
|
1.784 |
3.943 |
8.919 |
14.37 |
20.094 |
|
NiCrMg(NN) |
0.980~ 1.000 |
1.959~ 1.981 |
4.035~ 4.075 |
6.212~ 6.274 |
8.318~ 8.402 |
|
|
0.99 |
1.97 |
4.055 |
6.243 |
8.36 |
|
NiCrSi-NiCrMg |
2.741~ 2.807 |
5.877~ 5.949 |
12.915~ 13.033 |
20.519~ 20.707 |
28.330~ 28.580 |
|
|
2.774 |
5.913 |
12.974 |
20.613 |
28.455 |
Physical parameters
|
Specification |
Density (g/cm3) |
MP(℃) |
TS (mpa) |
Extensibility |
Resistivity (20℃μΩ.m) |
|
NiCrSi(NP) |
8.5 |
1410 |
≥620 |
≥25 |
0.97 |
|
NiCrMg(NN) |
8.6 |
1340 |
≥550 |
≥30 |
0.33 |
QUALITY GUARANTEE
SICC can supply type N thermocouple alloy wires meet the accuracy standard IEC60584 and ASTM E230. The advanced melting skills combined controls the chemical composition to achieve the highest quality products , our produce base has the capacity of 900 tons annual with 35000 square meters that can meet your comprehensive requirements. Whatever the bright annealed or oxidized conditions, all thermocouple materials are calibrated at our lab, this includes the testing of EMF, chemical composition, physical and thermoelectric properties before shipment.
SICC provides calibration results for all bare thermocouple wires with each shipment, including EMF values, accuracy, batch number, raw materials chemistry, lab environment condition,etc. Each order has only one job number for tracement. Calibration capability is available up to 1000C on suitable thermocouple types.
Our lab routinely calibrates at the following fixed points:100C,200C,400C,600C,800C for type N thermocouple materials, we work continuously to reduce the measurement uncertainty at each calibration temperature and new estimates are made every six months to ten months, ensuring any deviations are identified early so that results generated by the lab remain consistent and accurate.
Contact us today for your any requirements.
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
