100G QSFP28 LR4 optical transceiver module, support 100Gb/s and up to 10 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on.
SZOPT’s SC/APC OptiTap connector cable assemblies provide a cost effective, convenient operation, environmental seal and mechanical protection solution. The design makes the connector has blind-mating function, provides quick installation solutions and has good performance, it can be compatible with all the similar products in market, such as Corning Opitap-SC and H-type connector, Cable can be 2×3.0mm, 2×5.0mm flat drop or 5.0mm and 7.0mm round cable, amored or non-amored. Please reach us for details.
OPPC is a type of power composite cable that combines optical fiber unit and traditional phase structure in the wire, it makes full use of its own line power system resources, particularly the power system resources, particularly the power distribution network system, to avoid conflict with the outside world in aspects such as frequency resources, routing coordination, electromagnetic compatibility, which gives it dual functions of power transmission and communication.
This is a kind of ABS box PLC Splitter available with 1X4/1X8/1X16/1X32/1X64/1X128,2X4/2X8/2X16/2X32/2X64/2X128,the terminators can be sc/lc/fc/st in 3.0mm or 2.0mm cable,the cable length is usually 1-1.5m.Available wavelength is:1260-1650nm.
100G QSFP28 DWDM optical transceiver module, support 48*100Gb/s DWDM System and up to 80 km transmission on SM fiber, it works in high-speed IDC connection solutions.
10G SFP+ optical transceiver module, support 10Gb/s and up to 100 km transmission, including: SFP+ SR, SFP+ LR, SFP+ ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, 5G network front-haul solution, network switch, PTN, OTN and so on.
MPO/MTP Trunk Cables 12/16/24 Core is type of multitcore cable assemblies facilitate rapid deployment of high density backbone cabling in data centers and other high fiber environment, reducing network installation or reconfiguration time and cost.MTP/MPO are used to interconnect cassettes, panels, or fan outs using a compact and rugged microcables structure. The compact cable optimizes cable way use and improve airflow.These MPO/MTP cable are build with the highest quality components , Low loss elite(premium) versions are offered accordingly,please contact SZOPT for details.
Fiber Adapters (Mating Sleeve Fiber Adapter or Standard Fiber Adapter or Bulkhead Type Fiber Adapter) also called fiber adaptors,are used to link optical cables or device. Usually they are female to female,or female to male. SZOPT’s fiber adapters are mainly with ceramic sleeves, but phosphor bronze sleeve is an option for some special requirement.
FBT coupler is a type of optical power management device that is fabricated using Fused Biconical Tape technology.It features small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting.SZOPT provides a whole series of 1xN and 2xN splitter products that are tailored for specific applications. All products meet GR-1209-CORE and GR-1221-CORE.Both tree and star type inline couplers/splitters are available.Our items provide a reliable solution to split/combine signals.Single,dual,and tripple wavelength windows(1310/1490/1550nm) are available.
Fiber optic closures provide a protected area for the spliced sections to live, keeping them away from any hazards. Any of these that come in contact with the wires can lead to damage. Bugs may bite through the protective layers, while moisture can flood the cabling. Even things like vandalism and damage from car accidents can be troublesome. A rugged, hermetically sealed fiber optic splice closure can better protect cables and the sensitive data that runs through them from many of the dangers they face.
100G QSFP28 CWDM4 optical transceiver module, support 100Gb/s and up to 2 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on.
Fiber optic closures provide a protected area for the spliced sections to live, keeping them away from any hazards. Any of these that come in contact with the wires can lead to damage. Bugs may bite through the protective layers, while moisture can flood the cabling. Even things like vandalism and damage from car accidents can be troublesome. A rugged, hermetically sealed fiber optic splice closure can better protect cables and the sensitive data that runs through them from many of the dangers they face.
IL<2.4dB , 100GHZ DWDM OADM MUX DEMUX Multiplexing of 8 Channels Drop and Add, over a Dark Fiber Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks
28 OTAPs Network Optical Taps, Support 14 lines traffic copy Low insertion loss – minimize impact on data flows Fully passive – monitoring infrastructure does not impact network availability Does not modify traffic – tools see real copies of the packets from the network Requires no power and does not have an IP address, providing safety from remote attacks Cost effective – avoid costly expenses managing SPAN ports
Fiber Adapters (Mating Sleeve Fiber Adapter or Standard Fiber Adapter or Bulkhead Type Fiber Adapter) also called fiber adaptors,are used to link optical cables or device. Usually they are female to female,or female to male. SZOPT’s fiber adapters are mainly with ceramic sleeves, but phosphor bronze sleeve is an option for some special requirement.
Product Name:Power Distribution Cabinets Type: Rack or 19' cabinet Specification: Customized
1.25G SFP optical transceiver module, support 1.25Gb/s and up to 120 km transmission, including: SFP SR, SFP LR, SFP ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, network switch, PTN, OTN and so on.
UTP Cat5 Cat6 Cat7 Lan Cable is a popular UTP network cable or ethernet cable for lan field with full category,please reach us for details.
This is a kind of ABS box PLC Splitter available with 1X4/1X8/1X16/1X32/1X64/1X128,2X4/2X8/2X16/2X32/2X64/2X128,the terminators can be sc/lc/fc/st in 3.0mm or 2.0mm cable,the cable length is usually 1-1.5m.Available wavelength is:1260-1650nm.
Fiber optic closures provide a protected area for the spliced sections to live, keeping them away from any hazards. Any of these that come in contact with the wires can lead to damage. Bugs may bite through the protective layers, while moisture can flood the cabling. Even things like vandalism and damage from car accidents can be troublesome. A rugged, hermetically sealed fiber optic splice closure can better protect cables and the sensitive data that runs through them from many of the dangers they face.