AC to DC 12V 300W Constant voltage LED power supply

Sales AC to DC 12V 300W Constant voltage LED power supply

AC to DC 12V 300W Constant voltage LED power supply
  • Input Voltage : 100-265V
  • Output Voltage : 12VDC
  • Output Current : 25A
  • Working Mode : Constant Voltage
  • Certification : ETL CE ROHS
  • Warranty : 2 years

Product Detail  

Product name: AC to DC 12V 300W Constant voltage LED power supply



 SPECIFICAION 
MODEL SMT-012-300VW SMT-024-300VW SMT-036-300VW
OUTPUT DC VOLTAGE DC12V DC24V DC36V
RATED CURRENT 25.00A 12.50A 8.33A
CURRENT RANGE 0-25.00A 0-12.50A 0-8.33A
RATED POWER 300 W 300W 300W
RIPPLE&NOISE(max) 150mV 150mV 150mV
CURRENT TOLERANCE
SETUP RISE TIME 80ms/220VAC
HOLD UP TIME(Typ.) 60ms/220VAC
INPUT VOLTAGE RANGE 170~265VAC
FREQUENCY RANGE 50~60Hz
POWER FACTOR(Typ.) PF0.6-0.8/220VAC
EFFICIENCY(Typ.) ﹥84% ﹥84% ﹥84%
AC CURRENT(Typ.) 1.85A/220VAC
INRUSH CURRENT (Typ.) COLD START 50A/20VAC
PROTECTION Short circuit Protection type:recovers automatically after condition is removed
Overload overload protected@145-160% above peak rating
Over temperature Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT WORKING TEMP.  -40~+50℃ (Refer to output load derating curve)
WORKING HUMIDITY 20~99% RH non-condensing(Waterproof)
STORAGE TEMP.,HUMIDITY -40~+80℃,10~99%RH
SAFETY&EMC SAFETY STANDARDS SELV,CE Mark(LVD),IP67
WITHSTAND VOLTAGE I/P-O/P:1.5KVAC  IP-GND:1.5KVAC
EMC Test Standards EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006
NOTE 1.All parameters NOT specially mentoned are measured at 220VAC input,rated load and 25℃ of ambient temperature.
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel
3.Tolerance:includes set up tolerance,line regulation and load regulation.


Triac dimmable led driver
Dali dimmable led driver
0-10V led power supply
277v led driver




 Specifications 


1. Modle: SMT-012-300VW

2. Input: 170-265vAC  /  47-63HZ

3. Output : 12V  25.00Amp  300Watt
4. Case material: Aluminum
5. Waterproof rate: IP67 
6. Unit weight: 2400g
7. Product size: 235*120*56mm
8. Box size: 475*298*185mm
9. Pack qty: 5pcs/ctn
10.Pack weight: 12kg/ctn
11.Produt cord: 18AWG*20CM

13.Two years warranty (We promise to replace new ones to you if there is any defective happen during the warranty period)


 Features 


1. High efficiency,save energy ,protected environment.
2. High stability and low ripple, increase light efficiency and decrease light attenuation.
3. Meet to safety standard and EMC
4. Assure LED stability long lift and light efficiency by constant voltage.
5. Integrity protection,over loading, over voltage ,over current.
6. Protections:Short circuit/Overload/Over temperature
7. Cooling by free air convection
8. 100% full load burn-in test.

9. Suitable for LED lighting


 Environment 


1. Working temp: -30~+50℃ (Refer to output load derating curve)
2. Working humidity: 20~99% RH non-condensing(Waterproof)

3. Storage temp. humidity: -40~+80℃,10~99%RH


 Safety 


* Safety Standards : IEC 61347 –2–11 , IEC 61347 –1 , IEC 60529 , IP67 approved
* Withstand Voltage : I/P-O/P: 3000KVAC

* Isolation Resistance : I/P-O/P:100M Ohms/500VDC.



 Applications 


Our products are widely used in various industries, such as
* indoor LED illuminating lights
* LED Neon
* LED urban Decoration
* LED Lighting Advertising,
* LED Display
* Safety Protection Apparatus 
* Telecommunications
* Networks

* Vehicle Lights Controller Panels,etc.

12V 300W Constant voltage LED power supply


 Packing 


Aluminum housing IP67 led driver for LED Neon


 Our Factory 


LED driver 12v 300w for led strips,light bar


 


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.