Connect up to 100% of the rated 120-watt maximum load, derating performance is not required, led driver 120w delivers stable and energy-efficient, low-voltage power to Marvel LED display lighting installation.
Specification
| Model | SMT-012-120VWN | SMT-024-120VWN | |
| Output | DC Voltage | 12V | 24V |
| Rated Current | 10A | 5A | |
| Rated Power | 120W | ||
| Voltage Tolerance | ±0.5V | ||
| Voltage Regulation | ±0.5% | ||
| Load Regulation | ±2% ±1% | ||
| Input | Voltage Range | 100-277VAC | |
| Frequency Range | 47-63Hz | ||
| Power Factor(Typ.)@ full load | 0.99@120VAC 0.97@230VAC 0.96@277VAC | 0.99@120VAC 0.97@230VAC 0.96@277VAC | |
| THD(Typ.)@ full load | <15%@120VAC <20%@230VAC <20%@277VAC | ||
| Efficiency(Typ.)@ full load | 80%@120VAC 84%@ 230VAC 84%@277VAC | 85%@120VAC 88%@230VAC 88%@277VAC | |
| AC Current(Max.) | 1.7A@100VAC | 1.7A@100VAC | |
| Inrush Current (Typ.) | 20A, 50%, 1.6ms@120VAC; 30A,50% 200us@230VAC; 25A,50%,1.2ms@277VAC | ||
| Leakage current | <0.50mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over Loading | ≤120% constant current limiting, auto-recovery | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20~90% RH, non-condensing | ||
| Storage TEMP. Humidity | -40~+80℃,10~95%RH | ||
| TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | UL8750 | |
| Withstand voltage | I/P-O/P:1.88KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | FCC Part 15 B | ||
| Others | Net Weight | 1.08Kg | |
| Size | 230*70*43mm(L*W*H) | ||
| packing | 329*279*176mm , 10PCS/ctn | ||
| Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. | ||
| 2. To extend the driver's using life ,please reduce the loading at lower input voltage. | |||
Compatible Light Type
Lepro 32.8ft LED strip is cuttable between every 3 leds, 6000K bright 1800lm LED tape light for kitchen, living room, stairs and more, you should need a led tape light driver to work it.
Related Products
Mode：SMT-012-120VM
Dimming Mode : Dali Dimming
Output Power : 120W
intput voltage：100~265V AC
Size：230*68*45MM （L*W*H）
Smooth, full range, flicker-free dimming led driver 120w, designed using high-performance, professional grade electronics.
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
