CWFL-2000 water chiller developed by S&A Teyu is made especially for fiber laser applications up to 2KW. It features a dual channel design with control accuracy of ±0.5℃. 

Two temperatures can be supplied from one single chiller unit for the fiber laser and the laser head, indicating up to 50% space saving comparing with the two-chiller solution.

Fiber laser tends to generate a vast mount of heat during operation. Excessive heat will increase the risk of component failure or degrade the performance of the laser. With this active cooling laser water chiller machine, not only the fiber laser but also the laser head can be perfectly cooled and their lifespans can be extended. 

The warranty period is 2 years.

 Features  

8. Optional heater and water filter.

  Specification  

Note: 
1. The working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product;
2. Clean, pure, impurity free water should be used. The ideal one could be purified water, clean distilled water, deionised water, etc.;
3. Change out the water periodically (every 3 months is suggested or depending on the actual working environment);

4. Location of the chiller should be well ventilated environment. There must be at least 50cm from the obstacles to the air outlet which is on the top of the chiller and should leave at least 30cm between obstacles and the air inlets which are on the side casing of the chiller. 

User-friendly temperature controllers for easy operation

Equipped with drain outlet with valve and universal wheels