Sap:6" 7" 8" Material: Cr-v/55#Carbon steel Metric and Imperial" Black finish and polish Two color handle
EN 13709 Design and manufacture. EN558-1 Face to Face dimension. EN1092-B1 Flange and dimension. EN12266 Test and inspection standard.
Load capacity/Rated load: 2000KG Overall length (with out fork): 2210 MM Overall width: 1070 MM Turningradius:2010MM Imported CURTIS controller/SME
Sap:4" 4.5" 5" Material: Carbon steel+Plastic Coated High quality Carbon steel Black finish and polish
Pressure Regulator Pressure Reducer CO2 Carbon Dioxide Heat Pressure Gauge 36V Model: YQT-731L Material: Brass Gas: CO2 Rated Inlet Pressure: 15Mpa Rated Outlet Pressure: 0.1-1.25Mpa Rated Flow: 50m³/h Inlet Thread: G5/8(OEM) Outlet thread: M16*1.5(OEM)
•Largecoppermotor •Thickenedbase •Imported bearings •Plywood angle adjustment •Start switch •Wheel protection cover
The rigging can be used as a single-limb lashing rigging. When the single-limb lashing rigging is used, just hook the hook into the chain, and the rated load will be reduced by 20%.
Green work environment Easy operation High efficiency Low maintenance cost High cost-effective Long handle design
Application:Gas Welding and cutting, for Industrial. Connection:Thread Model: YQY-07 Material: Brass Gas: OXYGEN Rated Inlet Pressure: 25Mpa Rated Outlet Pressure: 0.1-2Mpa Rated Flow: 50m³/h Inlet Thread: G5/8(OEM) Outlet thread: M16*1.5(OEM)
Load capacity/Rated load: 350KG Overall length (Cargo fork):1 455MM Overall width:800MM Travel speed(aden/unladen):Referto the climbing curve Imported CURTIS controller
Square drive.:1/2", 3/4",1" Shank Material: Cr-V
Product Color: Yellow Main Material: Metal+Plastic SAP Spec: 1600w 185mm 7 inch circular saw with strong power and duct collection bag. It's widely used for wood cutting work. It's a hand-held tool, which can use TCT saw blade.
Imperial unit And Metric units Housing Material: ABS Ruler Material: Steel Housing Color: Black and Yellow Ruler Size(LxW): About 3m x 16mm, 5m x 19mm,7.5mx25mm,10mx25mm
1. Tape specification: 50mx14.5mm, 2. Measurement accuracy: Class II 3. Material of frame: ABS+soft rubber
Application:Gas Welding and cutting, for Industrial. Connection:Thread Model: YQW-02 Material: Brass Gas: PROPANE Rated Inlet Pressure: 1.6Mpa Rated Outlet Pressure: 0.1-0.15Mpa Rated Flow: 1.5m³/h Inlet Thread: G5/8(OEM) Outlet thread: M16*1.5(OEM)
These cutting torch tips are divided into 1#2#3#4#. The number represents the size of the central fire hole, that is, the size of the fire. Model: G07-30/100/300 Cutting Thickness: 1-30mm/30-100mm/100-300mm Cutting Nozzle Size: 1#/2#/3#/4# Oxygen Working Pressure MPa: 0.3-1.1 Gas Working Pressure MPa: 0.02/0.03/0.05/0.06 Weight: 28g-75g
These cutting torch tips are divided into 1#2#3#4#. The number represents the size of the central fire hole, that is, the size of the fire. Model: G01-30/100/300 Cutting Thickness: 30-30mm Cutting Nozzle Size: 1#/2#/3#/4# Oxygen Working Pressure MPa: 0.3-0.1 Gas Working Pressure MPa: 0.02/0.03/0.05/0.06 Weight: 28g-75g
Application:Gas Welding and cutting, for Industrial. Connection:Thread Model: YQAR-01 Material: Brass Gas: Argon Rated Inlet Pressure: 15Mpa Rated Outlet Pressure: 0.3Mpa Rated Flow: 0-25m³/h Inlet Thread: G5/8(OEM) Outlet thread: M16*1.5(OEM)
It is a metal stamping part made of cold rolled plate after stamping and stretching and then electroplating