Silicone Rubber Cold Shrink Tube With Mastic en-KC97

Sales Silicone Rubber Cold Shrink Tube With Mastic en-KC97

◆ High elastic silicone rubber tube structure with mastic built-in, dual layers design can bring double guarantee of weatherproofing protection;
◆ IPX8 class, stable and long-life during operation;
◆ Easy to install, only two steps (Cover, pull);
◆ Fast installation, only 15-30 seconds needed to seal one connection;
Easy to uninstall, only need knife to cut tube open;
◆ No limits for installation space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance;
◆ Much time cost, and labor cost saving;
◆ Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone;

Product Detail  

en-KC97 is the upgrade solution of KC97 cold shrink tube with built-in mastic, which has been re-designed with special appearance on tube’s surface, much helpful to improve tube’s resistance to puncture and other external damage. It has the same performance as KC97 cold shrink tube for weatherproofing protection on cable connections or joints applied on cell sites, such as connection between jumper cable and connector (7/16 DIN, N type or 4.3-10 connector) on RF equipment (RRU, Antenna and passive device), and joint between feeder and jumper cable. Comparing with tape sealing protection, time of installation is much shorter (15-30 seconds), more convenient, uniform waterproofing quality.

Silicone cold shrink tubes


Applications

1. Widely used in communication base station coaxial cable, N type joints and 1/2 jumper, Din connector and 1/2 jumper connector waterproof sealing
2. Waterproof and moistureproof TV cable joint sealing
3. The insulating sealing connecting wire and cable
4. The insulating sealing protection of other types of connections


Property

Item

Parameter and Result

Test Method

Waterproof

Class

Pass, IPX8

IEC 60529:1989+A1:1999+A2:2013;

1 meter depth in water, duration: 8 hours

Physical and mechanical properties

Shore Hardness

A/41/1

ASTM D2240-15

Tensile Strength

9.42 MPa

ASTM D412-15a Method A

Elongation

960%

ASTM D412-15a Method A

Tear Strength

41.6 KN/m

ASTM D624-00(2012)

Brittleness temperature by impact

Pass

ASTM D746-14

Flammability

Horizontal burning

HB

UL 94-2013 Rev.6-2016 Section 7

Temperature

Installation temperature

-40℃ - 60℃

 

Operation temperature

-60℃ - 90℃

Stock temperature

-60℃ - 90℃

Note:Not for specifications. Values are typical, not to be considered minimum or maximum.



Specification

Mode

I.D(mm)

Relaxed I.D(mm)

Relaxed Length(mm)

Description

en-KC97-40

≥38

≤13

≥140

Cold Shrink Tube, designed for 1/2" jumper to equipment, only applicable for 7/16 DIN or 4.3-10 connector

en-KC97-28

≥27

≤12

≥110

Cold Shrink Tube, designed for 1/2" jumper to equipment, only applicable for 4.3-10 or Type N connector

en-KC97-AISG

≥22

≤10

≥110

Cold Shrink Tube, applicable for AISGcable to RET


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.