UCFB..A Standard duty,Flange bracket,Inch-based housing,Wider inner ring bearing,Setscrew locking,Cast gray iron housing .

The basic deep groove ball bearing consists of an outer ring, an inner ring, a set of steel balls and a set of cages. There are two types of deep groove ball bearings: single-row and double-row.

Insert ball bearing With eccentric sleeve, its code is: UEL200 series, UEL300 series, SA200 series. The main feature of this kind of ball bearing is that there is a certain eccentricity at the upper end of the bearing, and the eccentric sleeve with the same eccentricity cooperates with it.

The code of Insert ball bearing with set screw is uc200 series (light series), uc300 series (heavy series) and UB (sb) 200 series. If the application environment is small, uc200 series is usually selected on the applications,, otherwise uc300 series is selected. Generally, there are two jackscrews on the spherical surface ball bearing, with an included angle of 120 °.

It is mainly used to bear the combined radial and axial load mainly based on the radial load.

Insert ball bearings are preferred for applications requiring simple equipment and components, such as agricultural machinery, transportation systems, or construction machinery.

The code of Insert ball bearing with set screw is uc200 series (light series), uc300 series (heavy series) and UB (sb) 200 series. If the application environment is small, uc200 series is usually selected on the applications,, otherwise uc300 series is selected. Generally, there are two jackscrews on the spherical surface ball bearing, with an included angle of 120 °. The characteristic is that the jackscrew is used to Jack the shaft when cooperating with the shaft, and then it has a fixed effect. However, the cooperation environment needs to have a small oscillation scale.

The code of Insert ball bearing with set screw is uc200 series (light series), uc300 series (heavy series) and UB (sb) 200 series. If the application environment is small, uc200 series is usually selected on the applications,, otherwise uc300 series is selected. Generally, there are two jackscrews on the spherical surface ball bearing, with an included angle of 120 °.

Although its basic performance is similar to that of deep groove ball bearing, most of the bearings are used in relatively rough machinery, the installation and positioning are not accurate enough, the axis of the shaft and the seat hole is neutral, or the shaft is long and the deflection is large, and the accuracy of the bearing itself is not high enough, and some structures are relatively rough, so the actual performance of the bearing is relatively the same specification Deep groove ball bearings are subject to considerable discount.

The insert ball bearing is a variant of the deep groove ball bearing. the outer diameter surface of the outer ring is spherical, which can be fitted into the corresponding concave spherical surface of the bearing housing to play the role of centering. The insert ball bearing is mainly used to bear the combined radial and axial load, which is mainly the radial load. Generally, it is not suitable to bear the axial load alone

Flange Cartridge Bearing Units, UCFC Standard duty, Wider inner ring bearing,Setscrew locking, Cast gray iron housing

Adjustable Flange Bearing Units is one design of mounted ball bearing unit, UCFA2 is the suffix of this type bearing unit, the bearing unit have UC chrome steel pillow block bearings and FA housing with cast iron materials.

UCPH bearing is a type of bearing unit. This bearing unit is also a combination of PH bearing housing and pillow block bearing. UCPH bearing seat is much higher than other types of bearing housing, mainly used in special installation environment. The bearing housing is mainly made of cast iron, and stainless steel and plastic materials are used less than cast iron. The pillow block bearing is the same with the other types of mounted bearings unit.

UCT Standard duty,Wider inner ring bearing,Setscrew locking,Cast gray iron housing . Cast DUCTILE iron housing available upon request.

UCFL series 2-bolts flange bearing unit is one kind of design of mounted ball bearing unit, it consist of UCFL housing and UC, NA, UE, UK, SB type pillow block bearing, Setscrew and Eccentric locking. the material of the FL housing can be cast iron, cast steel, plastic and stainless Steel design, each of the housing and insert bearing can be interchange each other.

Pillow blocks can refer to a variety of bearing styles such as single row ball bearings, double row ball bearings, spherical roller bearings, taper roller bearings, etc. A unit is typically a reference for a 1-piece housing as opposed to a split housing. For simplicity, this article will focus on single row ball bearing units.

The design of the UCPA series ball Bearing unit also has a certain degree of self-aligning, easy to install, with double structure sealing device, which can work in harsh environment. UCPA bearing block is generally cast. Other common types of bearing housing are UCP, UCF, UCFS, UCFC, UCFL, UCT etc.

Mounted Ball Bearing Unit have many features and are available in various models. A wide selection of mounted units is offered to fit virtually any application. Mounted Ball Bearing Unit consist of Insert ball bearing and High Quanlity Solid Cast Iron pillow block.

4-bolt flange bearing units is one kind of mounted ball bearing units, this design have 4 bolt in the housing and its suffix is UCF series, The UCF Ball bearing unit are also the most widely used on the market.

Pillow block bearing unit is a bearing unit that combines a rolling bearing with a bearing housing. Most pillow block bearings are made of spherical outer diameter and are installed with pillow block which have spherical inner holes. They have various structural forms, good versatility and interchangeability.