Round LED Driver Sensor DIP Switch Control 50 60 Hz For Ceiling Light

Sales

Round LED Driver Sensor DIP Switch Control 50 60 Hz For Ceiling Light

Product Detail

CE Approval Round design LED Driver Sensor 120-240VAC DIP Switch For Ceiling Light

Detailed Product Description

Input voltage	220~240VAC 50/60Hz
Input current	0.3A-0.15A
Input power	35 W
Detection area	50%/100%
Hold time	5s/90s/ 5min/10min
Daylight threshold	2Lux /10Lux /50Lux/Disable
Stand-by period	0s/10s/10min /+∞
Stand-by dimming level	10%/30%
Microwave frequency	5.8GHz±75MHz
Microwave power	<0.3mW
Detection angle	30°~150°
Mounting height	Max.6m(ceiling mounted) Max.3m(wall mounted)
Detection range	Max.ø14m(ceiling mounted) Max.10m(wall mounted)
Output LED current	0.45A/0.55A/0.60A/0.70A ±5%
Output LED voltage	33V~43V DC
Output LED power	30W
Empty load voltage	≤60V DC
Power factor	≥0.9
Efficiency	89% (Max.)
Operating temperature	Ta:- 20°C~50°C Tc: 85°C
Abnormal protection	SCP:Auto recovery,OVP,OCP,OTP
EMC standard	EN55015
Safety standard	EN61347-1 EN61347-2-13 EN60598-1
IP rating	IP20
Life time	30,000 hours
Warranty	3 years

Wiring diagram

Mechanical structure(mm)

Lux on/off

Adopted dual PD technology, HT30VR is able to differentiate artificial light brightness from natural light after installed inside the fixture, and automatically turn off light
when ambient brightness exceeds preset lux level.
Preconditions to use the Lux-off function:
1. Standby period is +∞;
2. Standby dimming level is on 10%, 20% or 30%;
3. Daylight threshold is on 30Lux, 50Lux, 80Lux or 120Lux.