HT9130 Quick Drying and high softening point Hot Polymerization Petroleum Resin C9 for Paint and Ink 

Product Name

C9 Petroleum Hydrocarbon Resin (Aromatic Resin)

C9 Resin HC Series Hot Polymerization (C9 Thermal Hydrocarbon Resin)

Type

HT-9130

Chemical Properties

HT-9130 C9 Resin is made by C9 fraction, through polymerization. 

High softening point Hydrocarbon resin C9  HT9130 is granular solid with the color of yellow to light brown.

HT-9130 has the properties of good solubility, mutual solubility, water resistance, insulation and very good chemical stability over acid and alkali, and good adhesive strength and lower heat conduction, etc

Specifications

Applications

Printing ink:

HT-9130 owns the characteristics of resistance of water, melting, and dryness.

When it be put into printing ink, it plays immediate role on vehicles, quick-drying, and brightening, and moreover, it can increase the printing performance.

So it can be used to make various printing ink.

Coating:

HT-9130 can mix with some kinds of drying oil in the production of paint.

Coating of each color can be gotten from mixtures of various resin and pigment.

The coatings produced by petroleum-resin are widely in surface coating of vehicle, vessel, and bridge.

It greatly improves the brightness, hardness, water resistance, and alkali resistance of paint film, and reduces the production cost.

Rubber:

HT-9130 Petroleum-resin applies to addition agent of natural and synthetic rubber.

It can improve shaping operation and increase the hardness and flexibility of products.

As hardness and aging resistance of rubber are improved, this resin is especially applicable to be as softening agent for SBR rubber, and used for the production of rubber tubing, vee-belt and tire.

Adhesives:

HT-9130 has good cohesive property, it is a preferable tackifier between adhesive and pressure-sensitive adhesive tape.

HT-9130 can be used in adhesive for plywood, wall paper and leather production.

This resin has good waterproof performance.

Because of small shrink rate during solidification process, it can be used in foundry industry.

Related Products