Lab High Temperature 1600C Single Zone Tube Furnace for Atmosphere Sintering

Sales Lab High Temperature 1600C Single Zone Tube Furnace for Atmosphere Sintering

Sales Manager: Andrea

Email: Andrea@tmaxlaboratory.com

Wechat: 18250801164

  • Certificate : CE, IOS, ROHS, SGS, UL Certificate
  • Warranty : Two years limited warranty with lifetime technical support

Product Detail  

Lab High Temperature 1600C Single Zone Tube Furnace for Atmosphere Sintering



This tube furnace uses silicon molybdenum rod as heating element, adopts double-layer shell structure and temperature control instrument. It can carry out 30-stage program temperature control, phase-shift trigger, and thyristor control. The furnace is made of alumina polycrystalline fiber material. Both ends of the furnace tube are sealed with stainless steel flanges, and gas nozzles, valves and pressure gauges are installed on the stainless steel flanges. The vacuum degree can reach 10-3 Pa when evacuating. The furnace has the advantages of balanced temperature field, low surface temperature, fast rise and fall temperature rate, and energy saving. It is an ideal product for high-temperature atmosphere sintering, atmosphere reduction, CVD experiment, vacuum annealing in universities, scientific research institutes, and industrial and mining enterprises.


Detailed technical parameters

 Model

TL1600-I

TL1600-II

TL1600-III

Power

5KW

   5KW

6kw

 Tube size(OD)(mm)

High-purity corundum tube: 60/80/100*1000mm (optional tube diameter)

Two furnace plugs are placed on each side. The furnace plug can block the heat radiation in the center of the furnace tube and must be placed in the correct position in the furnace before heating.

Dimension

1120X490X855

1120X490X855

1120X520X945

supply voltage

                                               220V

phase

                                          single phase

heating element

                     1800 model silicon molybdenum bar

Temperature control type

Use Yudian program temperature control instrument (standard)

1. 30-segment program temperature control intelligent PID adjustment.

2. With over-temperature protection, the electric furnace heating circuit will be automatically cut off when the temperature is over-temperature or when the couple is broken. ON, the ON light on the panel is off, the OFF light is on, and the electric furnace is limitedly protected).

3. With 485 communication interface (standard with optional software)

4. It has a power failure protection function, that is, when the furnace is powered on after the power is turned off, the program does not start from the initial temperature, but starts from the furnace temperature when the power is off.

5.The meter has the function of temperature self-tuning

(you need to pay extra for the replacement of imported instruments, optional)

                                           

FP93 instrument                         EUROTHERM instrument                         Touch screen instrument

(shimaden, Japan)

Chamber material

 1. The hearth material is made of high quality alumina polycrystalline fiber.

2. The surface of the inner furnace is coated with imported 1800 degree high temperature alumina coating, which can increase the emissivity and make the temperature field more balanced.

Valves and flanges 

control precision

                                                      +/- 1℃

trigger

                                            Phase-shifted trigger

electric appliance

                                                 Zhejiang chint

silicon controlled

                                              106/16E SEMIKRON

Max. temp

                                                    1600℃

Rated temp

                                                    1550℃

heating rate

                   ≤20℃/ Min(Can be modified as required)

Recommended rate of heating

                                           ≤10  ℃/ Min

Thermocouple model

                                                 B Type

Length of heating section

                                                   300mm

Temperature calibration (optional)

Regular temperature calibration of the tube furnace can maintain the accuracy and uniformity of the furnace temperature. You can buy a simple calibration tool from our company to assist you in this task. The complete calibration kit includes standard thermocouples, temperature calibrators, and compensation leads.

            

Ambient surface temperature

                                                     ≤45℃





 Tmax CE

 TMAX Partner

CVD furnace


tube furnace


muffle furnace



1 Standard exported package: Internal anticollision protection, external export wooden box packaging.

2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.

3 Responsible for the damage during the shipping process, will change the damage part for you for free.



Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.