It adopts full digital voltage and current double closed loop control, combined with advanced SPWM technology to output pure sine wave.
Two output modes: mains bypass and inverter output enable uninterrupted power supply.
4 charging modes are available for choice: only PV, mains priority, PV priority, and hybrid charging.
AdvancedMPPT technology with efficiency up to 99.9%.
LCD screen design, with 3 LED indicators, for dynamic display of system data and run status.
ON/OFF rocker switch controls AC output.
Power saving mode reduces no-load loss.
Intelligent variable speed fan ensures efficient heat dissipation, and thereby extends system life.
It comes with double lithium battery activation modes: mains and PV, and supports lead-acid battery and lithium battery access.
Multiple protections provide 360 ° all-round protection for the system.
Complete protections include multi-electrical appliance air switch short circuit protection, overvoltage and undervoltage protection, overload protection, back-flow protection, etc.
Horizontal installation facilitates cabinet combination installation.
Lithium battery can be activated by both mains and PV panel.
Main parameters
|
Model |
HT4830S80-145 |
HT4840S80-145 |
HT4850S80-145 |
HT4825U80-145 |
HT4830U80-145 |
HT4835U80-145 |
| Mains mode | ||||||
|
Rated input voltage |
220/230Vac |
110/120Vac |
||||
|
Input voltage range |
(170Vac~280Vac) ±2% |
(90Vac~140Vac) ±2% |
||||
|
Frequency |
50Hz/ 60Hz (automatic detection) |
|||||
|
Frequency range |
47±0.3Hz ~ 55±0.3Hz (50Hz); |
|||||
|
Overload/short circuit protection |
Circuit breaker |
|||||
|
Efficiency |
>95% |
|||||
|
Conversion time |
10ms (typical) |
|||||
|
(bypass and inverter) |
||||||
|
AC backflow protection |
Yes |
|||||
|
Maximum bypass overload current |
40A |
|||||
| Inverter mode | ||||||
|
Output voltage waveform |
Pure sine wave |
|||||
|
Rated output power (VA) |
3000(2600/2700 |
4000(3480/360 |
5000(4350/4500 |
2500(2000/2180 |
3000(2500/2600 |
3500(2900/3000 |
|
Rated output power (W) |
3000(2600/2700 |
4000(3480/360 |
5000(4350/4500 |
2500(2000/2180 |
3000(2500/2600 |
3500(2900/3000 |
|
Power factor |
1 |
|||||
|
Rated output voltage (Vac) |
230Vac(200/208/220/240Vac Settable) |
120Vac(100/105/110Vac Settable) |
||||
|
Output voltage error |
±5% |
|||||
|
Output frequency range (Hz) |
50Hz ± 0.3Hz |
|||||
|
Efficiency |
>92% |
>91% |
||||
|
Overload protection |
(102%<load<125%) ±10%: Report error and turn off output after 5 minutes; |
(102%<load<110%) ±10%: Report error and turn off output after 5 minutes; |
||||
|
Peak power |
6000VA |
8000VA |
10000VA |
4000VA |
4500VA |
5000VA |
|
Loaded motor capacity |
2HP |
3HP |
4HP |
1HP |
2HP |
2HP |
|
Output short circuit protection |
Circuit breaker |
|||||
|
Bypass circuit breaker specification |
63A |
|||||
|
Rated battery input voltage |
48V (minimum starting voltage 44V) |
|||||
|
Battery voltage range |
40.0Vdc~60Vdc ± 0.6Vdc (undervoltage alarm / shutdown voltage / overvoltage alarm / overvoltage recovery…LCD screen can be set) |
|||||
|
Eco mode |
Load ≤ 50W |
|||||
| AC charging | ||||||
|
Battery type |
Lead acid or lithium battery |
|||||
|
Maximum charge current |
0-60A |
0-40A |
||||
|
Charge |
± 5Adc |
|||||
|
Charge voltage range |
40 – 58Vdc |
40 – 60Vdc |
||||
|
Short circuit protection |
Circuit breaker |
|||||
|
Circuit breaker specification |
(AC IN) 63A/(BAT) 125A |
|||||
|
Overcharge protection |
Alarm and turn off charging in 1 minute. |
|||||
| PC charge | ||||||
|
Maximum PV open circuit voltage |
145Vdc |
|||||
|
PV operating voltage range |
60-145Vdc |
|||||
|
MPPT voltage range |
60-115Vdc |
|||||
|
Battery voltage range |
40-60Vdc |
|||||
|
Maximum output power |
4200W |
|||||
|
PV charge current range (settable) |
0-80A |
|||||
|
Charge short circuit protection |
BAT circuit breaker and fuse |
|||||
|
Wiring protection |
Reverse polarity protection |
|||||
| Hybrid charging Max charger current specifications (AC charger+PV charger) | ||||||
|
Max charger current(can be set) |
0-140A |
0-120A |
||||
| Certified specification | ||||||
|
Specification certification |
CE(EN62109) |
|||||
|
EMC certification level |
EN61000, C2 |
|||||
|
Operating temperature range |
-15°C to 55°C |
|||||
|
Storage temperature range |
-25°C ~ 60°C |
|||||
|
RH range |
5% to 95% (conformal coating protection) |
|||||
|
Noise |
≤60dB |
|||||
|
Heat dissipation |
Forced air cooling, adjustable air speed |
|||||
|
Communicat ion interface |
USB/RS485 (WiFi/GPRS)/Dry Node Control |
|||||
|
Dimensions (L*W*D) |
482*425*133mm |
|||||
|
Weight (kg) |
13.3 |
|||||
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
