Huge capacity transmission Excellent 100G transmission performance Flexible and comprehensive service access capability Telecom Reliable protection Excellent structure, convenient and easy to maintain
This is a kind of ABS box PLC Splitter available with 1X4/1X8/1X16/1X32/1X64/1X128,2X4/2X8/2X16/2X32/2X64/2X128,the terminators can be sc/lc/fc/st in 3.0mm or 2.0mm cable,the cable length is usually 1-1.5m.Available wavelength is:1260-1650nm.
Fiber Optical Patch Cord FC-LC has SC & LC connectors,with PVC,LSZH,OFNP jacket in yellow(SM);orange(OM1/OM2),aqua(OM3), magenta(OM4),lime green(OM5) or custom,the cable diameter is 3.0mm,2.8mm,2.4mm,2.0mm,1.8mm,1.6mm,1.2mm,0.9mm,etc.
Fiber Optical Patch Cord SC-LC has SC & LC connectors,with PVC,LSZH,OFNP jacket in yellow(SM);orange(OM1/OM2),aqua(OM3), magenta(OM4),lime green(OM5) or custom,the cable diameter is 3.0mm,2.8mm,2.4mm,2.0mm,1.8mm,1.6mm,1.2mm,0.9mm,etc.
Variable in-line optical attenuators,also know as adjustable in-line optical attenuator or short as VOA, are used to permit dynamic control of optical power levels in a fiber. It can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or dynamic range of power meter. Furthermore, they can the used in optical amplifier systems to balance the gain across the different operating wavelengths.
TXZR3 Medium Voltage PLC Communication module, independently researched and developed by Topscomm can realize the conversion between data information and carrier signal, the transmission and reception of carrier signal.
Variable in-line optical attenuators,also know as adjustable in-line optical attenuator or short as VOA, are used to permit dynamic control of optical power levels in a fiber. It can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or dynamic range of power meter. Furthermore, they can the used in optical amplifier systems to balance the gain across the different operating wavelengths.
CWDM MUX DEMUX,Multiplexing up to 8 Channels on Dual Fiber Monitor Port for Troubleshooting, 1310nm Port for Legacy Traffic Passive, Protocol Transparent for Ethernet, FC, OTN, SONET/SDH, etc. Fully Compatible with All ITU-T 1G/10G/25G CWDM Optics Applied to Metro, Regional CWDM Networks
Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation of the input optical power, avoid optical receiver distortion due to input optical power powerful. The fixed fiber optic attenuator can achieve the dual function of adapter and attenuators.
Fiber Optic PLC splitter patch panel is a kind of distribution box fabricated by using silica optical waveguide technology. It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in PON networks to realize optical signal power management. SZOPT provides a whole series of 1 x N and 2 x N splitters that are tailored for specific applications. All our products meet Telcordia 1209 and 1221 reliability requirements and are certified by TLC for network development requirment..
Fiber Optical Patch Cord SMA-SMA has SMA connectors on both ends,with PVC,LSZH,OFNP jacket in yellow(SM);orange(OM1/OM2),aqua(OM3), magenta(OM4),lime green(OM5) or custom.Simplex or Duplex is available.
Unmatched Low Cost, Mini Bypass Mechanical Optical Switch Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path
DDSK1710 series Single-Phase Smart Energy Meter, developed and produced by Qingdao Topscomm communication co., LTD., are a new generation of high-end smart energy metering products.
Mode conditioning patch cords are required when Gigabit 1000BASE-LX routers and switches are installed into existing multimode cable plants. They are used to adapt the singlemode output of Gigabit Ethernet (1000BASE-LX) transceivers to a multimode cable network. All SZOPT’s mode-conditioning patch cords are fully compliant with IEEE 802.3z application standards.
Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation of the input optical power, avoid optical receiver distortion due to input optical power powerful. The fixed fiber optic attenuator can achieve the dual function of adapter and attenuators.
The ribbon Optical Pigtail SC/FC/LC/ST/MU/E2000 12C 24C 48C 96C 144C usually has 12 or 24 connectors on one end,with PVC,LSZH,OFNP jacket in yellow(SM);orange(OM1/OM2),aqua(OM3), magenta(OM4),lime green(OM5) or custom,the cable diameter can be custom,etc.
Fiber Optical Patch Cord FC-ST has FC & ST connectors,with PVC,LSZH,OFNP jacket in yellow(SM);orange(OM1/OM2),aqua(OM3), magenta(OM4),lime green(OM5) or custom,the cable diameter is 3.0mm,2.8mm,2.4mm,2.0mm,1.8mm,1.6mm,1.2mm,0.9mm,etc.
Low noise figure:typical 5.0dB High flatness: typical 1dB Cover whole C-Band: carrie 40 or 80 chs Redundancy hot swap power module: 110/220VAC and 48VDC can plug Mix Perfect Network Interface:standard RJ45 industrial standard interface and SNMP. Provide upper computer software, query and set up optical amplifier equipment, use Ethernet network or serial port access.
Such patch cords are armored with black PE jacket,waterproof,roden-proof,widely used for harsh environment,there's a stainless steel strength member inside to make the cable tough tensile strenth,the fiber counts can be up to 24 fibers.
Capacity: 10-30KVA UPS Features: tower, three phase in, single phase out Output PF=0.8 UPS with built-in isolation transformer, Dual DSP digital control technology,Safe and Reliable,Comprehensive Protection,Intelligent Management Battery: internal Color: Black Description: HQ 31 SERIES is 3 phase low frequency UPS 10KVA-30KVA