Product Item

Automatic spraying machine is used for die casting machine

Product Description

Product Features

1.Connecting rod structure, high mechanical strength, good stability

2.Germany Siemens servo motor, worm gear and worm mechanism, high transmission efficiency, good stability

3.Motor drive is adopted for mold thickness adjustment, which is directly completed on the touch screen, convenient and quick.

4.Handheld man-machine interface, integrated with setting and operation, and with fault self-diagnosis function.

5.Independent atomizing nozzle is adopted to achieve excellent atomization effect. Each spray nozzle can be independently adjusted and the Angle of the nozzle can be adjusted.

6.With 100 sets of mold storage function.

Product Parameters

1.LHfour-bar, LH straight, LH vertical rotary, LH horizontal sprayer characteristics

2.Four-bar spray sprayer, the mechanical structure is sturdy and durable.

3.Vertical rotary sprayer, can choose the function of fixed point before and after rotation, convenient to up and down mound, can increase the speed of producing finished product, strong and durable.

4.Straight-in sprayer, can choose vertical front fixed point and vertical post-fixed point function, convenient up and down die, can increase the production speed of finished products, mechanical durable.

5.Horizontal sprayer, can choose the function of front and rear fixed point, easy to up and down mold, can increase the speed of production products, durable machinery.

6.The device can be single-acting, can also be with die-casting machine, soup machine, extraction machine on-line, into full-automatic production.

7.The atomizer alone makes the atomization effect of fixed and movable mold good, and the water quantity can be adjusted, and there is no leakage at all. The atomization effect of the atomizer is more prominent when used in small finished products.

8.The device can be separately fixed side, active side spray release agent time adjustment.

9.The device has the function of rising and falling blowing air, it can clean the fixed and movable mould surface simultaneously, make the die surface clean and clean.

10.This device can adjust the dosage of spray release agent per minute.

11.The injection device can be divided into front injection and back injection, which can make injection lubrication effect on die surface.

12.Visual customer demand device intermediate spray, increased spray effect.

13.The device adopts PLC control loop and has the function of displaying fault code.