Fully automatic extractor can take out die casting parts instead of human arm.
Product Item
Automatic extractor for die casting machine
Product Description
Product Features
1.Horizontal multi - link arms, floor mounted compact design small footprint
2.Using Taiwan chuanshih cycloidal needle motor and reducer, the arm multi-stage speed control is more stable than pneumatic control, which can move at high speed without impact
3.Time parameters and position setting can be set through the touch screen, with the function of operation and fault self-diagnosis, which can monitor each action position of the device
4.Japanese TOYO absolute value encoder is used to digitize the arm position adjustment
5.Lateral drawing is driven by motor
6.It can be operated alone or connected with die-casting machine, soup feeder and sprayer to become fully automatic equipment.
Product parameters
Power: AC220V 50Hz 2KVA
Air source interface: 1 / 2 "5.0-6.0kg/cm
Main arm stroke: 650-950 mm
Cross trip: 40-180 mm
Action period: 4-8S
Main arm rotation: 90 degrees
Size: 1200 mm × 700 mm × 1000 mm
Machine weight: 350kg
|
Serial number |
operation |
Correlative factor |
Remarks |
|
1 |
Manual |
SB1 button selection manual |
The pick-up machine is in the manual state completely, the single action is realized when each action condition is satisfied |
|
2 |
Automatic |
SB1 button selection automatic |
The pick-up machine is completely in the automatic state, press the start button to realize the automatic operation. |
|
3 |
Arm advance |
Manual, the SB2 selection button turns counterclockwise to the left |
Die casting machine in the open die position, the main arm forward. Make sure there are no obstacles in front of the arm, otherwise the machine will be damaged. |
|
4 |
Arm recession |
Manual state, SB2 select button turn clockwise to the right |
The main arm moved backwards. |
|
5 |
Before Horizontal Action |
Manual state, SB3 horizontal button |
The main arm moves in the direction of the moving mode. |
|
6 |
After Horizontal Action |
Manual state, SB3 horizontal button |
The main arm moves towards the fixed mold. |
|
7 |
Hand clamp |
Manual state, SB4 clamp button |
Clamp hands to carry out clamping actions. |
|
8 |
Pinch hand |
Manual state, SB4 clamp button |
Hold hands in action. |
|
9 |
Arm rotation |
Manual status, SB5 arm rotation button |
The clamp moves 90 degrees clockwise. |
|
10 |
Arm rotation |
Manual status, SB5 arm rotation button |
The clamps turn 90 degrees counterclockwise. |
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
