12v 24v 96W power supply Aluminum 100-277VAC input led driver for led lighting

Sales

12v 24v 96W power supply Aluminum 100-277VAC input led driver for led lighting are sell well in North American and Europe market.The waterproof grade is high and it can replace the LED floodlight 100W power supply of ledwatcher.

Certification : UL CE ROHS
Size : 230*70*46mm
Dimming mode : triac dimming
Working Mode : constant voltage
Output Current : 8A
Output Voltage : 12v
Input Voltage : 100-277VAC

Product Detail

12v 24v 96W power supply Aluminum 100-277VAC input led driver for led lighting

UL listed triac dimmable led driver are our competitive product,they have got good reputations in North American market . All the this items are Triac dimmable Constant voltage led drivers,and all are UL CE ROHS FCC approved.

It takes about 7 years warranty,if there is any defective happen(normal using) during the warranty period,we promise to give replacement(the same item)

Specification

model		SMT-012-100VTHW/SMT-024-096VTHW
Output	DC Voltage	12/24V
	Voltage Accuracy	±0.5V
	Rated current	8.33A/4.0A
	Rated power	96W
Input	Voltage Range	100~277V AC
	Frequency Range	47～63HZ
	Power Factor ( Typ.）	PF≧0.95/110V,PF≧0.97/277V
	Full Load Efficiency(Typ.)	>82%
	AC Current（Typ.）	1.33A/110VAC
	Inrush Current （Typ.）	20A, 50%, 1.6ms
	Leakage current	﹤0.5mA/110V
Protection	Short Circuit	Hiccup mode, recovers automatically after fault condition is removed.
	Over temperature	100℃±10℃ shut down o/p voltage, automatically recover after cooling.
	Over Loading	≤120% constant current limiting, auto-recovery
	Over voltage	≦140VAC(90~135V) , ≦270VAC(170~265V)
Environment	Working TEMP.	-40～+60℃
	Working Humidity	20～90%RH,non-condensing
	Storage TEM.,Humidity	-40～+80℃，10～95%RH
	TEMP.coefficient	±0.03%/℃（0～50℃）
	Vibration	10～500Hz，2G 10min./1 cycle，period for 60min.each along X,Y,Z axes
Safety&EMC	Safety standards	UL8750+UL1310
	Withstand voltage	I/P-O/P:3.75KVAC
	Isolation resistance	I/P-O/P：100MΩ/500VDC/25℃/70%RH
	EMC EMISSION	FCC Part 15 B
	EMC IMMUNITY	Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11,EN61547Alight industry level （surge4KV）
Others	Net Weight	1.1Kg
	Size	2307046mm（LWH）
	packing	329279176mm , 10PCS/ctn
	Notes	1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and 25℃of ambient temperature. 2. Tolerance:includes set us tolerance,line regulation and load regulation .
Label

What's the series of power supply do you have?

Answer: We specialized in constant voltage & current LED drivers, 010v/triac/DALI dimmable led drivers, enclosure power suppliers, power adapters

Mechanical Specification

※ Input Rubber wire 3*18AWG Black and White to be connected to AC L and N ,Green wire go ground,

※Output Rubber wire, 2*16AWG Red to LED Positive side (+) , Black to LED Negative side (-).

Dimming Operation

1) Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.

2) The Pulse-Width Modulation (PWM) of output voltage can be adjusted by the input terminal of the AC phase line(L) by connection a phase/triac dimmer.

3) Compatible with Forward phase, leading edge, Magnetic low voltage, triac dimmers, or Reverse phase, trailing edge ,Electric low voltage Dimmers.

4) please try to use the small power dimmers with power at least 1.5 times as the output power of the driver., which can be accessed to a wider dimming range, high-power dimmer is difficult to achieve the output current to zero.